画像は参照用のみです。
N25Q128A13E1240E
IC FLASH 128MBIT SPI 24TPBGA
- メーカー
- Mfr。パート #N25Q128A13E1240E
- パッケージ T-PBGA-24
- データシート
- 在庫中7164
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tray |
| ProductStatus | Obsolete |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 128Mb (32M x 4) |
| MemoryInterface | SPI |
| ClockFrequency | 108 MHz |
| WriteCycleTime-WordPage | 8ms, 5ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 24-TBGA |
概要
Description
N25Q128A13E1240E is a 128‑Mbit Serial NOR Flash memory with SPI-compatible interfaces (including Quad IO modes) for embedded storage. It stores firmware or data and supports fast reads, low‑power modes, and security/protection features. Organization: 128 Mbit arranged in 16,384 pages of 256 bytes. Interfaces: SPI with standard and Quad IO modes; supports typical NOR flash voltage ranges per variant and deep power‑down. Features: page program (256 bytes), sector/block erase, write‑enable latch and write protections, status/configuration registers, and security features. Package: compact serial 8‑pin package (Vcc, GND, CS, CLK, IO0/IO1, plus WP/HOLD pins on variants). Endurance and data retention are typical of NOR flash; supports JEDEC command set and vendor‑specific opcodes (consult datasheet for exact commands). Uses: firmware storage and updates, boot code, and data logging where random access is needed. Access basics: initialize SPI, read IDs, enable writes, perform program/erase with proper addressing and timing, poll status via WIP, and manage WP/HOLD and power modes. For precise timings, voltage ranges, and opcodes, refer to the official N25Q128A13E1240E datasheet.
Features
Key features of Micron N25Q128A13E1240E (128 Mbit Serial NOR Flash):
- 128 Mb (16 MB) Serial NOR flash memory
- SPI-compatible interface with Dual/Quad I/O (DQ lines) for higher throughput
- Page size: 256 bytes; erase sectors: 4 KB, blocks: 32 KB and 64 KB; chip erase
- Read speeds: up to fast read; Quad I/O mode supports higher throughput (up to ~104 MHz)
- Power modes: deep power-down and standby for low power
- Endurance: typically ~100k P/E cycles; data retention ≥ many years (per spec)
- Security: hardware write protection (BP), sector protection, OTP/security features, 256-bit unique ID
- SFDP/JESD-compliant; Quad Enable (QUAD_EN) for Quad I/O operation
- Operating voltage: device variants exist (commonly 1.8V or 3.3V); confirm exact Vcc in datasheet
- Package options: common small-footprint options; extended temperature grade available
Note: exact Vcc and some packaging/temperature details depend on the specific variant; verify in the datasheet.
- 128 Mb (16 MB) Serial NOR flash memory
- SPI-compatible interface with Dual/Quad I/O (DQ lines) for higher throughput
- Page size: 256 bytes; erase sectors: 4 KB, blocks: 32 KB and 64 KB; chip erase
- Read speeds: up to fast read; Quad I/O mode supports higher throughput (up to ~104 MHz)
- Power modes: deep power-down and standby for low power
- Endurance: typically ~100k P/E cycles; data retention ≥ many years (per spec)
- Security: hardware write protection (BP), sector protection, OTP/security features, 256-bit unique ID
- SFDP/JESD-compliant; Quad Enable (QUAD_EN) for Quad I/O operation
- Operating voltage: device variants exist (commonly 1.8V or 3.3V); confirm exact Vcc in datasheet
- Package options: common small-footprint options; extended temperature grade available
Note: exact Vcc and some packaging/temperature details depend on the specific variant; verify in the datasheet.
Package
8-pin SOP (SOIC-8) package.
Pinout
Pin count: 8 pins (SOIC-8 / WSON-8).
Function: 128-Mbit serial SPI NOR flash memory. Interfaces via standard SPI: CS, SCK, MOSI, MISO; includes WP# and HOLD# protection pins; powered by VCC with GND.
Function: 128-Mbit serial SPI NOR flash memory. Interfaces via standard SPI: CS, SCK, MOSI, MISO; includes WP# and HOLD# protection pins; powered by VCC with GND.
Manufacturer
- Manufacturer: Micron Technology, Inc.
- What kind of company: An American multinational semiconductor company that designs and manufactures memory and storage technologies (DRAM, NAND/NOR flash) and operates as an integrated device manufacturer (IDM) with global reach.
- What kind of company: An American multinational semiconductor company that designs and manufactures memory and storage technologies (DRAM, NAND/NOR flash) and operates as an integrated device manufacturer (IDM) with global reach.
Application
Typical uses for N25Q128A13E1240E (128 Mbit Quad SPI Flash):
- Boot memory and firmware storage for microcontrollers, SoCs, and FPGAs
- Execute-In-Place (XIP) code storage in embedded systems
- Configuration data, calibration tables, and logs in automotive, industrial, and consumer devices
- Firmware/software updates for IoT devices, networking gear, printers, and set-top boxes
- Small, low-power non-volatile storage for embedded sensors and wearables
- Boot memory and firmware storage for microcontrollers, SoCs, and FPGAs
- Execute-In-Place (XIP) code storage in embedded systems
- Configuration data, calibration tables, and logs in automotive, industrial, and consumer devices
- Firmware/software updates for IoT devices, networking gear, printers, and set-top boxes
- Small, low-power non-volatile storage for embedded sensors and wearables
Equivalent
Possible equivalents (128 Mbit, Quad SPI, 3.0–3.6 V) include:
- Winbond W25Q128JV / W25Q128FV
- Macronix MX25L12845G (and MX25U12845G)
- Spansion S25FL128S
- Gigadevice GD25Q128C
- ISSI IS25LP128
Note: pinout, voltage, timing, and command compatibility vary by part and package. Always verify against the N25Q128A13E1240E datasheet and the target device’s footprint before replacement.
- Winbond W25Q128JV / W25Q128FV
- Macronix MX25L12845G (and MX25U12845G)
- Spansion S25FL128S
- Gigadevice GD25Q128C
- ISSI IS25LP128
Note: pinout, voltage, timing, and command compatibility vary by part and package. Always verify against the N25Q128A13E1240E datasheet and the target device’s footprint before replacement.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25L3233FM1I-08Q
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L6433FM2I-08G
Macronix