VNP10N07-E

画像は参照用のみです。

VNP10N07-E

IC PWR DRIVER N-CHAN 1:1 TO220AB

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tube
Series OMNIFET™, VIPower™
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration Low Side
OutputType N-Channel
Interface On/Off
Voltage-Load 55V (Max)
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 14A
RdsOn(Typ) 100mOhm (Max)
InputType Non-Inverting
FaultProtection Current Limiting (Fixed), Over Temperature, Over Voltage
MountingType Through Hole
SupplierDevicePackage TO-220

概要

Description

VNP10N07-E is a single‑channel smart high‑side switch from STMicroelectronics’ VIPower family. It integrates a high‑side MOSFET and protection circuitry to drive a load from a supply rail in automotive/industrial environments.
Key features:
- Built‑in current limiting, thermal shutdown, undervoltage lockout
- Overvoltage/short‑circuit protection and reverse‑battery protection
- Open‑load detection and diagnostic (fault/STATUS) output
How it works:
- IN controls the switch; OUT powers the load from VS (the supply)
- Suitable for inductive or resistive loads (e.g., lamps, relays, actuators) in 12/24 V automotive systems
The E suffix typically indicates an enhanced/extended-temperature or automotive‑grade/ECOPACK packaging variant. For exact electrical specs (voltage range, current limit, Rds(on), fault thresholds), consult the ST datasheet.

Features

VNP10N07-E features:
- Single-channel smart high-side switch with integrated N-channel MOSFET
- Wide input voltage range for automotive/industrial use
- On-chip protections: undervoltage lockout, overcurrent/short-circuit protection (fast response), and overtemperature shutdown
- Current limiting with soft-start to control startup/inrush
- Enable (EN) input to enable/disable output
- Diagnostic/status reporting with fault indication
- Suitable for driving DC motors, solenoids, and LED drivers
- Compact package for space-constrained designs
- Reliable protection against fault events with auto-recovery after faults (where applicable)

Package

VNP10N07-E comes in an 8-pin SO-8 surface-mount package (Pb-free; E suffix indicates lead-free).

Pinout

- Pin count: 8 pins (8‑pin package, e.g., SO-8)
- Function: Smart high-side switch with an integrated N‑channel MOSFET (about 7 A/70 V class). Used to drive DC loads (e.g., motors) from logic signals, with built‑in protections (current limiting, undervoltage, overcurrent/overtemperature, fault/open‑load diagnostics) and a diagnostic/status output.

Manufacturer

Manufacturer: Vishay Intertechnology (Vishay).
What kind of company: Vishay is a global, publicly traded manufacturer of discrete semiconductors and passive electronic components (e.g., MOSFETs, diodes, resistors, capacitors) with worldwide operations.

Application

VNP10N07-E is an intelligent high-side power switch. Typical application areas:
- Automotive and industrial DC load switching (lamps, motors, solenoids, relays)
- LED lighting drivers and general power-switching
- Circuits requiring integrated protection (current limit, undervoltage/overcurrent, thermal shutdown)

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似