画像は参照用のみです。
TPS7A0233PDQNR
IC REG LINEAR 3.3V 200MA 4X2SON
- メーカー
- Mfr。パート #TPS7A0233PDQNR
- パッケージ X2SON-4
- データシート
- 在庫中4575
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| OutputConfiguration | Positive |
| OutputType | Fixed |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 6V |
| Voltage-Output(Min/Fixed) | 3.3V |
| VoltageDropout(Max) | 0.31V @ 200mA |
| Current-Output | 200mA |
| Current-Quiescent(Iq) | 60 nA |
| PSRR | 55dB (1kHz) |
| ControlFeatures | Enable |
| ProtectionFeatures | Over Current, Over Temperature, Under Voltage Lockout (UVLO) |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | 4-XDFN Exposed Pad |
概要
Description
TPS7A0233PDQNR is TI’s fixed-output, low-noise LDO regulator. It provides a clean 3.3-V output from a higher input, with ultralow output noise and high PSRR suitable for noise-sensitive analog/RF and microcontroller applications. The device includes protection features such as current limit, thermal shutdown, and reverse-current protection, making it robust for typical board conditions. It’s offered in the PDQNR package (a small DQFN-style package), which supports surface-mount designs and RoHS-compliant manufacturing.
Key points:
- Fixed 3.3-V output, low-noise, high PSRR
- Wide input range and good transient response (as per TPS7A0x family)
- Protection: current limit, thermal shutdown, reverse current
- Requires recommended input/output capacitors for stability
- Package: PDQNR (8-pin-ish DQFN style)
Ideal for precision analog, RF front-ends, sensor interfaces, and MCU supplies where a quiet 3.3-V rail is needed. For exact electrical specs, capacitor requirements, and pinout, consult the TI TPS7A0233 datasheet.
Key points:
- Fixed 3.3-V output, low-noise, high PSRR
- Wide input range and good transient response (as per TPS7A0x family)
- Protection: current limit, thermal shutdown, reverse current
- Requires recommended input/output capacitors for stability
- Package: PDQNR (8-pin-ish DQFN style)
Ideal for precision analog, RF front-ends, sensor interfaces, and MCU supplies where a quiet 3.3-V rail is needed. For exact electrical specs, capacitor requirements, and pinout, consult the TI TPS7A0233 datasheet.
Features
Key features of TPS7A0233PDQNR (3.3 V fixed LDO in PDQNR):
- 3.3-V fixed-output low-noise LDO
- Ultra-low noise with high PSRR across frequency range
- Very low dropout for efficient operation
- Low quiescent current with enable pin for power saving
- Logic-level enable input to shut down/regulate on demand
- Overcurrent/short-circuit protection and thermal shutdown
- Wide input-voltage range and stability with a broad ESR output capacitor range
- Small 8-pin PDQ package for compact designs
Note: For exact electrical specs and recommended capacitors, refer to the datasheet.
- 3.3-V fixed-output low-noise LDO
- Ultra-low noise with high PSRR across frequency range
- Very low dropout for efficient operation
- Low quiescent current with enable pin for power saving
- Logic-level enable input to shut down/regulate on demand
- Overcurrent/short-circuit protection and thermal shutdown
- Wide input-voltage range and stability with a broad ESR output capacitor range
- Small 8-pin PDQ package for compact designs
Note: For exact electrical specs and recommended capacitors, refer to the datasheet.
Package
TPS7A0233PDQNR uses an 8-pin DQFN package (DQFN-8), typically 2×3 mm.
Pinout
- Pin count: 6 pins (PDQ package)
- Function: Fixed 3.3 V low-dropout regulator with enable input (EN). Provides VOUT from VIN with a GND reference; EN controls output on/off. The remaining pins are typically no-connect/test pins (NC).
- Function: Fixed 3.3 V low-dropout regulator with enable input (EN). Provides VOUT from VIN with a GND reference; EN controls output on/off. The remaining pins are typically no-connect/test pins (NC).
Manufacturer
- Manufacturer: Texas Instruments (TI).
- About the company: TI is an American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, embedded processors, and other semiconductor products for global electronics markets.
- About the company: TI is an American multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, embedded processors, and other semiconductor products for global electronics markets.
Application
TPS7A0233PDQNR is a 3.3-V fixed-output, high-voltage-range low-noise LDO with enable and reverse-current protection. Typical applications: supply for microcontrollers, DSPs, and memories; analog front-ends, ADC/DACs, and sensor biasing; RF/communication modules; automotive and industrial electronics; portable/battery-powered devices needing low quiescent current and good PSRR; point-of-load regulation for regulators and op-amps in noise-sensitive circuits.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FZ2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX29LV640ETTI-70G
Macronix