TMP432BDGSR

画像は参照用のみです。

TMP432BDGSR

SENSOR DIGITAL -40C-125C 10VSSOP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SensorType Digital, Local/Remote
SensingTemperature-Local -40°C ~ 125°C
SensingTemperature-Remote -64°C ~ 191°C
OutputType SMBus
Voltage-Supply 2.7V ~ 5.5V
Resolution 12 b
Features One-Shot, Output Switch, Programmable Limit, Programmable Resolution, Shutdown Mode
Accuracy-Highest(Lowest) ±1°C (±2.5°C)
TestCondition 0°C ~ 100°C (-40°C ~ 125°C)
OperatingTemperature -55°C ~ 127°C
MountingType Surface Mount
Package/Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

概要

Description

TMP432BDGSR is a Texas Instruments digital temperature sensor with I2C output. It integrates a calibrated on‑chip temperature sensor and converts readings to digital data that a microcontroller can read directly, with no external ADC needed. Key features typically include:
- I2C (SMBus-compatible) digital output
- Factory-calibrated with good accuracy
- Low power consumption
- Wide supply range (roughly 2.7 to 5.5 V)
- Industrial temperature range (about −40°C to +125°C)
- 8-pin VSSOP package (BDGSR suffix defines the package and RoHS status)
Common applications: monitoring temperatures in CPUs/SoCs, batteries, consumer electronics, automotive and industrial equipment. The BDGSR suffix indicates the specific packaging and config for ordering.

Features

Key features of TMP432BDGSR (Texas Instruments digital temperature sensor):
- I2C/SMBus digital temperature sensor interface
- Operating range: -40°C to +125°C
- Resolution: 0.0625°C (12-bit)
- Accuracy: typically ±0.5°C over the operating range
- Supply voltage: 2.7V to 5.5V
- Small 8-pin package (BDGSR variant) with a compact footprint
- Low power operation with programmable conversion rate and shutdown mode
- Factory-calibrated; no external calibration required
- Programmable alert/interrupt output and configurable temperature limits
- I2C address selectable for multi-device configurations
Note: For exact electrical specs and pinout, refer to the official datasheet.

Package

The TMP432BDGSR is supplied in a 6-pin SOT-23 package (SOT-23-6), typically shipped on tape-and-reel.

Pinout

Pin count: 8 pins. Function: TI TMP432BDGSR is a digital temperature sensor with an I2C (2‑wire) interface; it measures ambient temperature and outputs the reading via I2C registers.

Manufacturer

Texas Instruments (TI) is the manufacturer. TI is an American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits (ICs), including sensors, op-amps, controllers, and power-management devices.

Application

Applications:
- Consumer electronics (PCs, tablets, wearables)
- Power management and battery packs
- Automotive (cabin and battery temperature monitoring)
- Industrial/building automation (HVAC, data centers, process control)
- White goods (refrigerators, air conditioners)
- Other systems needing accurate, low-power digital temperature sensing via I2C

Equivalent

Approximate equivalents to the TMP432BDGSR (I2C/SMBus digital temperature sensor with thermostat/alert) include:
- TMP102 (Texas Instruments)
- MCP9808 (Microchip)
- LM75/LM75A (On Semiconductor/Analog Devices)
- ADT7420 / ADT7301 (Analog Devices)
- MAX31725 (Maxim Integrated)
Check accuracy, supply range, register map and package pins to confirm direct interchange.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似