TM4C1230E6PMIR

画像は参照用のみです。

TM4C1230E6PMIR

IC MCU 32BIT 128KB FLASH 64LQFP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Texas Instruments
Package Tape & Reel (TR)
Series Tiva™ C
ProductStatus Active
CoreProcessor ARM® Cortex®-M4F
CoreSize 32-Bit Single-Core
Speed 80MHz
Connectivity CANbus, I²C, IrDA, Microwire, SPI, SSI, UART/USART
Peripherals Brown-out Detect/Reset, DMA, POR, WDT
NumberofI/O 49
ProgramMemorySize 128KB (128K x 8)
ProgramMemoryType FLASH
EEPROMSize 2K x 8
RAMSize 32K x 8
Voltage-Supply(Vcc/Vdd) 1.08V ~ 3.63V
DataConverters A/D 12x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 64-LQFP

概要

Description

TM4C1230E6PMIR is TI’s TM4C1230 microcontroller (Tiva C Series) based on a 32‑bit ARM Cortex‑M4F core. It runs up to about 80 MHz and includes on‑chip flash memory (typically 256 KB) with SRAM (around 32 KB) and a boot ROM. Peripherals cover a broad embedded toolbox: GPIO; multiple UARTs, SPI/SSI, I2C; USB 2.0 Full‑Speed; 12‑bit ADC; PWM and multiple timers; watchdog; analog comparator; and system control/CRC peripherals. It offers standard clock/power management and a rich interrupt system. Packaging and availability vary (suffix indicates packaging type like tape‑and‑reel); check the datasheet for exact pin count and package options. Development is supported by TI’s TivaWare libraries and common IDEs such as Code Composer Studio, Keil, and IAR. Typical use cases include small to mid‑range embedded applications needing USB connectivity, sensor interfacing, motor control, and general-purpose I/O. For precise specs and pinout, consult the TM4C1230E6PMIR datasheet and TI product page.

Features

Here are the key features of the TM4C1230E6PMIR (TI Tiva C series):
- Core: 32-bit ARM Cortex-M4F microcontroller with hardware single-precision FPU
- Speed: Up to 80 MHz operation
- Memory: On-chip flash (≈256 KB) and RAM (≈32 KB); ROM with driver library and boot code
- GPIO: Ports A–F (multiple I/O pins)
- Timers/PWM: Multiple general-purpose timers and PWM outputs
- ADC: 12-bit ADC with multiple channels (high-speed sampling)
- Serial interfaces: 2 UARTs, 2 SPI (SSI), 2 I2C
- Peripherals: Watchdog timer, system timing, other common MCU peripherals
- Power/Temp: 1.65–3.6V operation; industrial temperature range (-40°C to 105°C)
- Power modes: Sleep and Deep-Sleep for low power
- Debug/Program: SWD/JTAG for on-chip debugging and programming
- Package: 64-pin, with the MIR suffix indicating the specific package variant
Note: exact peripheral counts and package options can vary by exact device revision; consult the datasheet for precise specs.

Package

48-pin LQFP (Plastic Quad Flat Package); Tape-and-Reel packaging (IR).

Pinout

- Pin count: 64 pins (LQFP-64; also available in a 64-pin QFN/VQFN variant).
- Function: A 32‑bit ARM Cortex‑M4F microcontroller (Tiva C Series) with on‑chip flash/SRAM and a broad set of peripherals (GPIO, timers, ADC, PWM, UART/SPI/I2C, USB, etc.) for embedded control applications.

Manufacturer

- Manufacturer: Texas Instruments Incorporated (TI).
- What kind of company: An American multinational technology company that designs and manufactures semiconductors and electronic components, including microcontrollers, analog and embedded processing products, and other ICs for embedded systems.

Application

TM4C1230E6PMIR is a Cortex-M4F MCU suitable for compact, USB-enabled embedded systems. Key application areas include:
- Industrial automation and motor control
- Embedded control and instrumentation
- USB peripherals (HID/CDC devices)
- Data acquisition and sensor interfacing (ADC, I2C, SPI)
- IoT/edge computing and smart devices
- Robotics and actuators
- Home/building automation
- Education and prototyping (LaunchPad)

Equivalent

Equivalent Cortex-M4F MCUs with similar memory/peripherals include:
- ST STM32F303RET6 or STM32F411CEU6
- ST STM32F405/407 series
- NXP LPC4088
- Microchip SAM4S (e.g., SAM4S16E)
Note: exact match depends on required peripherals (USB/CAN, ADC, timers) and packaging.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似