TLE7251VLEXUMA1

画像は参照用のみです。

TLE7251VLEXUMA1

IC TRANSCEIVER 1/1 TSON-8

  • メーカー
  • Mfr。パート #TLE7251VLEXUMA1
  • パッケージ 8-TDFN Exposed Pad
  • データシート
  • 在庫中4105

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Infineon Technologies
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Not For New Designs
Type Transceiver
Protocol CANbus
NumberofDrivers/Receivers 1/1
ReceiverHysteresis 90 mV
DataRate 2Mbps
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature -40°C ~ 150°C
MountingType Surface Mount, Wettable Flank
Package/Case 8-TDFN Exposed Pad

概要

Description

The TLE7251VLEXUMA1 is TI’s single-channel high-side switch for automotive use. It integrates a protected power MOSFET plus control logic to switch a load on the battery rail under a microcontroller’s command, simplifying driver circuitry and protection. Key features typically include undervoltage lockout, overcurrent/short-circuit protection, thermal shutdown, and a current-limit function. It also provides diagnostic feedback (fault/diagnostic output) to help the MCU monitor load conditions. The device is designed for rugged 12–24 V automotive environments, with a wide operating input range (approximately 4.5–40 V) and protection against load dumps and EMI. The UMA1 suffix indicates a specific package/tape-and-reel variant suitable for surface-mount assembly. Common applications are driving inductive or resistive loads such as lamps, motors, pumps, and solenoids directly from an ECU.
Note: for exact electrical specs, pinout, timing, and package details, consult the TLE7251VLE datasheet and product page.

Features

Short summary of TLE7251VLEXUMA1 features (automotive LIN transceiver):
- One-channel LIN transceiver for automotive single-wire networks.
- Wide operating supply range suitable for 12/24 V systems (roughly 4.5–28 V).
- MCU interface: TXD input and RXD output for host microcontroller.
- Low-power operation with fast wake-up from sleep.
- Robust protection: short to GND or VBAT, overvoltage/undervoltage protection, reverse polarity protection, and thermal shutdown.
- ESD protection on pins; EMI-friendly with slew-rate control and current limiting.
- Diagnostic capabilities: fault/open-load/short-to-GND or short-to-VBAT indication for bus and/or TXD status.
- Wake-up features and filtering to minimize false wakes on the LIN bus.
- Automotive-grade, AEC-Q100 qualified with extended temperature range (typical -40°C to 125°C).
- Small, rugged package suitable for space-constrained automotive applications.
Note: For exact electrical specs (voltage ranges, currents, timings) and pinout, please refer to the official datasheet.

Package

The TLE7251VLEXUMA1 uses the VLE package – an 8‑pin Very Low‑profile Leadframe Package (UMA1 variant).

Pinout

- Pin count: 8 pins
- Function: Automotive LIN transceiver (physical layer). Interfaces a microcontroller to the LIN bus: provides TXD input and RXD output, LIN bus pin, supply (VBAT) and ground, plus wake-up and enable/shutdown control pins. Exact pinout depends on the package variant; consult the datasheet for mapping.

Manufacturer

- Manufacturer: Infineon Technologies AG
- Company type: German multinational semiconductor manufacturer (headquartered in Munich), specializing in automotive, industrial power, and security ICs; one of the world’s leading semiconductor suppliers.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似