画像は参照用のみです。
TCA9554ADBQR
IC I/O EXPANDER I2C 8BIT 16SSOP
- メーカー
- Mfr。パート #TCA9554ADBQR
- パッケージ 16-SSOP (0.154, 3.90mm Width)
- データシート TCA9554ADBQR DataSheet
- 在庫中7229
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Texas Instruments,Rochester Electronics, LLC |
| Package | Tape & Reel (TR),Cut Tape (CT),Bulk |
| ProductStatus | Active |
| NumberofI/O | 8 |
| Interface | I²C, SMBus |
| InterruptOutput | Yes |
| Features | POR |
| OutputType | Push-Pull |
| ClockFrequency | 400 kHz |
| Voltage-Supply | 1.65V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 16-SSOP (0.154, 3.90mm Width) |
概要
Description
TCA9554ADBQR is an 8‑bit I/O expander with an I2C interface. It lets a microcontroller extend its GPIOs by providing eight configurable I/O pins that can be set as inputs or outputs. Controlled via I2C registers (direction, output latch, GPIO read, and optional input polarity), with an interrupt output to signal input changes. Addressing is configurable with A0–A2 pins, allowing up to eight devices on the same I2C bus. The suffixes “DBQR” indicate packaging and RoHS/tape‑and‑reel options for this variant (exact package type should be confirmed in the datasheet). Typical uses include expanding GPIOs for sensors, switches, LEDs, and keypad scanning in embedded systems. For precise electrical specs, timing, register map, and packaging details, refer to the official datasheet.
Features
TCA9554ADBQR Features (concise):
- 8-bit I/O expander for I2C bus with interrupt output
- 8 bidirectional I/O pins; configurable as input or output via IODIR
- I2C interface up to Fast-mode (400 kHz)
- 3-bit hard-wired addressing (A0–A2) for up to 8 devices on the bus
- Input polarity inversion control (IPOL)
- Separate input/output data handling via PORT and OLAT-style registers
- Interrupt output (usually open-drain) for port-change events
- Wide supply range: typically 1.65 V to 5.5 V
- 16-pin package (specific package code in part suffix)
Note: exact electrical specs (voltage, temperature range, and current limits) are in the datasheet for the ADBQR variant.
- 8-bit I/O expander for I2C bus with interrupt output
- 8 bidirectional I/O pins; configurable as input or output via IODIR
- I2C interface up to Fast-mode (400 kHz)
- 3-bit hard-wired addressing (A0–A2) for up to 8 devices on the bus
- Input polarity inversion control (IPOL)
- Separate input/output data handling via PORT and OLAT-style registers
- Interrupt output (usually open-drain) for port-change events
- Wide supply range: typically 1.65 V to 5.5 V
- 16-pin package (specific package code in part suffix)
Note: exact electrical specs (voltage, temperature range, and current limits) are in the datasheet for the ADBQR variant.
Package
It’s a 16‑pin surface-mount device in a TSSOP‑16 package, supplied in tape‑and‑reel (QR) packaging.
Pinout
Pin count: 14 pins.
Function: NXP TCA9554ADBQR is an I2C-bus 8-bit I/O expander. It provides eight configurable GPIO pins (P0–P7) with I/O direction, input, and output control via I2C registers.
Function: NXP TCA9554ADBQR is an I2C-bus 8-bit I/O expander. It provides eight configurable GPIO pins (P0–P7) with I/O direction, input, and output control via I2C registers.
Manufacturer
- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits and other semiconductor devices.
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits and other semiconductor devices.
Application
8-bit I2C I/O expander (TCA9554A) that provides extra GPIOs for MCU/SoC. Suitable for:
- Extending I/O for LED indicators and backlight control
- Keypad/switch matrix scanning and general input capture
- Driving small relays or transistors (via buffer if needed)
- Interface to sensors, ADCs, DACs or other I2C peripherals
- Port expansion in embedded systems, consumer electronics, home/industrial automation
- Interrupt/polled event notification for detected changes
- Extending I/O for LED indicators and backlight control
- Keypad/switch matrix scanning and general input capture
- Driving small relays or transistors (via buffer if needed)
- Interface to sensors, ADCs, DACs or other I2C peripherals
- Port expansion in embedded systems, consumer electronics, home/industrial automation
- Interrupt/polled event notification for detected changes
Equivalent
Equivalents (I2C, 8-bit I/O expanders):
- NXP: PCF8574 / PCF8574A
- NXP: TCA9534 / TCA9534A
- ON Semiconductor: CAT9554
- Microchip: MCP23008
Related 16-bit options:
- NXP: PCF8575
- Microchip: MCP23x17 (MCP23017)
- NXP: PCF8574 / PCF8574A
- NXP: TCA9534 / TCA9534A
- ON Semiconductor: CAT9554
- Microchip: MCP23008
Related 16-bit options:
- NXP: PCF8575
- Microchip: MCP23x17 (MCP23017)
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX29F400CBTI-70G
Macronix
-
MX25V2033FM1I
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25L12833FZ2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29F800CBTI-70G
Macronix
-
MX29LV640ETTI-70G
Macronix