TCA4311ADR

画像は参照用のみです。

TCA4311ADR

IC ACCELERATOR I2C HOTSWAP 8SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Buffer, Accelerator
Applications I²C - Hotswap
Input 2-Wire Bus
Output 2-Wire Bus
NumberofChannels 1
Capacitance-Input 10 pF
Voltage-Supply 2.7V ~ 5.5V
Current-Supply 5.1mA
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

概要

Description

TCA4311ADR is a Texas Instruments I2C-bus buffer/level shifter. It provides bidirectional buffering between two I2C buses (two channels), enabling voltage level translation and isolation between devices or subsystems. This helps extend I2C bus length, protect devices from noise or faults, and allow different logic voltages on each side. Typical uses include large or mixed-voltage I2C networks, hot-plug scenarios, and noisy environments where clean, separated I2C signaling is needed. The ADR suffix usually indicates a specific packaging/reel option. For exact electrical specs, pinout, voltage ranges, and mode behavior, consult the TI TCA4311ADR datasheet.

Package

8-pin small-outline package (MSOP-8 / VSSOP-8) surface-mount. Check the datasheet for exact body size.

Pinout

Pin count: 8 pins (available in VSSOP/SOIC style packages; part suffix ADR denotes package/ordering code).
Function (concise): TCA4311 is a bidirectional I2C/SMBus bus buffer/level translator. It connects two I2C buses operating at different supply voltages (VCCA and VCCB), providing level translation, bus-hold/pull-up support and power‑off isolation/ESD protection so a powered bus does not back‑drive an unpowered bus. Typical pins implement SDA_A/SCL_A, SDA_B/SCL_B, VCCA, VCCB, GND and an enable/reset/control pin (package pin names vary by datasheet).

Manufacturer

- Manufacturer: Texas Instruments (TI).
- What kind of company: An American multinational technology company that designs and manufactures semiconductors and integrated circuits, specializing in analog, embedded processing, and digital signal processing products.

Application

- I2C bus buffering and level shifting between voltage domains
- Bus isolation to protect microcontrollers
- I2C line protection in automotive, industrial automation, and consumer electronics
- Extending I2C reach with additional devices
- Hardware-safe interfacing for hot-swappable I2C subsystems

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似