画像は参照用のみです。

STM32G071EBY6TR

Name: STM32G071EBY6TR
Rating: 4.7 (12 reviews)

IC MCU 32BIT 128KB FLASH 25WLCSP

メーカー
Mfr。パート #STM32G071EBY6TR
パッケージ
データシート STM32G071EBY6TR DataSheet
在庫中8022

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Series	STM32G0
Part Status	Active
DigiKey Programmable	Not Verified
Core Processor	ARM® Cortex®-M0+
Core Size	32-Bit Single-Core
Speed	64MHz
Connectivity	HDMI-CEC, I2C, IrDA, LINbus, SPI, UART/USART, USB Type-C™ (Power Delivery)
Peripherals	Brown-out Detect/Reset, DMA, I2S, POR, PWM, Temp Sensor, WDT
Number of I/O	23
Program Memory Size	128KB (128K x 8)
Program Memory Type	FLASH
RAM Size	36K x 8
Voltage - Supply (Vcc/Vdd)	1.71V ~ 3.6V
Data Converters	A/D 12x12b; D/A 2x12b
Oscillator Type	External, Internal
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Supplier Device Package	25-WLCSP (2.3x2.48)
Package / Case	25-UFBGA, WLCSP
Base Product Number	STM32G071

概要

Description

STM32G071EBY6TR is a mid-range MCU in ST’s STM32G0 family. It uses an ARM Cortex-M0+ core, designed for cost- and power-efficient applications, and typically runs up to 64 MHz. Key peripherals commonly include USB Full-Speed with on-chip PHY, 12-bit ADCs, DACs, comparators/operational amplifiers, timers, RTC, and serial interfaces (I2C, SPI, USART/LPUART). It supports flexible power modes (sleep/stop), DMA, and standard boot/config options. The EB Y6TR suffix denotes the exact package and tape‑and‑reel option; the precise pin count, Flash/RAM size, and peripheral mix depend on the specific variant. Development is via STM32CubeIDE with HAL/LL libraries, with many examples and support on Nucleo/Discovery boards. For exact specs, memory, and feature details, consult the STM32G0 datasheet and the STM32G071EBY6TR reference manual.

Features

Concise features of STM32G071EBY6TR:
- Core: 32‑bit ARM Cortex‑M0+ up to 64 MHz
- Memory (on this package): up to ~128 KB Flash and ~16 KB RAM
- USB: Full‑Speed USB device interface
- LCD: Dedicated LCD controller for segment LCDs
- Analog: 12‑bit ADC with multiple channels; two internal op‑amps and a comparator
- Timers: Multiple 16‑bit timers with PWM outputs
- DMA: Direct Memory Access controller
- Communications: USART/UART, I2C, SPI
- Security/Integrity: CRC unit for data integrity
- Power: 1.65–3.6 V operation; low‑power modes with sleep/wake
- Temperature: −40 to 85°C
- Package/QA: 64‑pin LQFP (EBY6), Tape & Reel (TR)
Note: exact memory sizes and peripherals can vary by variant; verify against the official datasheet for this specific device variant and package.

Package

STM32G071EBY6TR is in a 48‑pin LQFP package (LQFP-48, 7×7 mm), Tape & Reel packaging.

Pinout

- Pin count: 48 pins (LQFP48 package).
- Function: 32-bit ARM Cortex-M0+ microcontroller (STM32G0 series) for general-purpose embedded control, with integrated CPU, memory and peripherals (GPIOs and common communication interfaces).

Manufacturer

- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational electronics and semiconductor manufacturer headquartered in Europe (French-Italian origin).

Application

Applications: cost-effective, low-power embedded designs with USB. Suitable for IoT edge devices, home/building automation, consumer electronics (wearables, audio, display interfaces), motor control and power electronics, sensor data acquisition and conditioning, portable medical and instrumentation devices, energy/power metering, USB peripherals, and small industrial automation nodes.

Equivalent

Do you mean cross‑reference to other vendors or pin‑compatible ST variants?
- If pin‑compatible ST options: other STM32G071 devices in the BY6 package with different flash/RAM (same core/peripherals).
- If cross‑vendor equivalents: please specify the target vendor (NXP, Microchip, TI, etc.) and required specs (flash, RAM, peripherals).