画像は参照用のみです。
STM32F439IIH7
IC MCU 32BIT 2MB FLASH 176UFBGA
- メーカー
- Mfr。パート #STM32F439IIH7
- パッケージ UFBGA-176
- データシート STM32F439IIH7 DataSheet
- 在庫中2028
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tray |
| Series | STM32F4 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M4 |
| CoreSize | 32-Bit Single-Core |
| Speed | 180MHz |
| Connectivity | CANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT |
| NumberofI/O | 140 |
| ProgramMemorySize | 2MB (2M x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 256K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.7V ~ 3.6V |
| DataConverters | A/D 24x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 201-UFBGA |
概要
Description
STM32F439IIH7 is STMicroelectronics’ STM32F4 family microcontroller, a high‑performance MCU for embedded systems.
Key points
- Core: ARM Cortex-M4 with DSP/FPU, up to 180 MHz.
- Memory: on‑chip flash and RAM (specific sizes vary by variant; check datasheet).
- Peripherals: USB OTG FS/HS, CAN, SDIO, SPI/I2S, I2C, UART/USART; multiple timers; ADCs and DAC; CRC; RNG; MPU.
- Advanced peripherals: LCD‑TFT display controller, DCMI camera interface, JPEG hardware acceleration; cryptography engine (AES/HASH).
- Power: operates from 1.7–3.6 V with several low‑power modes.
- Packaging: available in various packages; suffix IIH7 encodes package/temperature variant—verify exact details from the datasheet.
- Development: supported by STM32CubeMX/HAL/LL libraries and ST‑Link debuggers.
Typical use cases
- Display‑rich devices, multimedia, USB devices/hosts, motor control, industrial automation.
Note
- For exact specs (memory sizes, pins, package), consult the official STM32F439IIH7 datasheet and reference manual.
Key points
- Core: ARM Cortex-M4 with DSP/FPU, up to 180 MHz.
- Memory: on‑chip flash and RAM (specific sizes vary by variant; check datasheet).
- Peripherals: USB OTG FS/HS, CAN, SDIO, SPI/I2S, I2C, UART/USART; multiple timers; ADCs and DAC; CRC; RNG; MPU.
- Advanced peripherals: LCD‑TFT display controller, DCMI camera interface, JPEG hardware acceleration; cryptography engine (AES/HASH).
- Power: operates from 1.7–3.6 V with several low‑power modes.
- Packaging: available in various packages; suffix IIH7 encodes package/temperature variant—verify exact details from the datasheet.
- Development: supported by STM32CubeMX/HAL/LL libraries and ST‑Link debuggers.
Typical use cases
- Display‑rich devices, multimedia, USB devices/hosts, motor control, industrial automation.
Note
- For exact specs (memory sizes, pins, package), consult the official STM32F439IIH7 datasheet and reference manual.
Features
Key features of STM32F439IIH7 (highlights):
- Core: 32‑bit ARM Cortex‑M4F with single‑precision FPU and DSP instructions
- Speed: up to 180 MHz
- Memory: up to 2 MB Flash, up to 256 KB SRAM (plus optional backup SRAM)
- External memory: FSMC for NOR/NAND/PSRAM
- Display/vision: LTDC LCD controller, DCMI camera interface, JPEG hardware accelerator
- Crypto/security: AES/DES crypto engine, RNG, CRC
- USB/SDIO: USB OTG (FS and HS capable on supported packages), SDIO interface
- Peripherals: multiple USART/UART, I2C, SPI, I2S; SAI; ADC (12‑bit, multi‑channel)
- Timers: several general‑purpose timers plus advanced TIM1/TIM8
- DMA: DMA1 and DMA2 with DMAMUX for high‑speed transfers
- Power/temp: 1.7–3.6 V operation; -40 to 85°C industrial temperature range
- Package: LQFP100 (IIH7)
Note: exact pinout/peripherals may vary by package options; verify variant details in the datasheet.
- Core: 32‑bit ARM Cortex‑M4F with single‑precision FPU and DSP instructions
- Speed: up to 180 MHz
- Memory: up to 2 MB Flash, up to 256 KB SRAM (plus optional backup SRAM)
- External memory: FSMC for NOR/NAND/PSRAM
- Display/vision: LTDC LCD controller, DCMI camera interface, JPEG hardware accelerator
- Crypto/security: AES/DES crypto engine, RNG, CRC
- USB/SDIO: USB OTG (FS and HS capable on supported packages), SDIO interface
- Peripherals: multiple USART/UART, I2C, SPI, I2S; SAI; ADC (12‑bit, multi‑channel)
- Timers: several general‑purpose timers plus advanced TIM1/TIM8
- DMA: DMA1 and DMA2 with DMAMUX for high‑speed transfers
- Power/temp: 1.7–3.6 V operation; -40 to 85°C industrial temperature range
- Package: LQFP100 (IIH7)
Note: exact pinout/peripherals may vary by package options; verify variant details in the datasheet.
Package
LQFP-100 package (100-pin, 14x14 mm footprint).
Pinout
- Pin count: 144 pins (LQFP-144 package)
- Function: 32-bit ARM Cortex‑M4F microcontroller (STM32F439 series) for embedded control with rich peripherals (USB, CAN, SDIO, ADC/DAC, etc.).
- Function: 32-bit ARM Cortex‑M4F microcontroller (STM32F439 series) for embedded control with rich peripherals (USB, CAN, SDIO, ADC/DAC, etc.).
Manufacturer
- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational electronics and semiconductor company headquartered in Geneva, Switzerland, known for designing and manufacturing microcontrollers (like the STM32), sensors, analog/digital ICs, and other semiconductor devices.
- What kind of company: A multinational electronics and semiconductor company headquartered in Geneva, Switzerland, known for designing and manufacturing microcontrollers (like the STM32), sensors, analog/digital ICs, and other semiconductor devices.
Application
- HMI/graphics-rich displays (LTDC, TFT, touch)
- Industrial automation and motor control
- Portable multimedia and consumer electronics (audio/video, USB OTG, SD)
- Instrumentation, data acquisition, and medical equipment
- Digital signage, kiosks, and smart appliances
- IoT gateways and embedded connectivity
- Real-time control systems and robotics
- Industrial automation and motor control
- Portable multimedia and consumer electronics (audio/video, USB OTG, SD)
- Instrumentation, data acquisition, and medical equipment
- Digital signage, kiosks, and smart appliances
- IoT gateways and embedded connectivity
- Real-time control systems and robotics
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U3232FZBI02
Macronix
-
MX25L25645GXDI-08..
Macronix
-
MX29F800CBTI-70G
Macronix