画像は参照用のみです。
STM32F205ZET7
IC MCU 32BIT 512KB FLASH 144LQFP
- メーカー
- Mfr。パート #STM32F205ZET7
- パッケージ LQFP 144
- データシート STM32F205ZET7 DataSheet
- 在庫中3518
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tray |
| Series | STM32F2 |
| ProductStatus | Active |
| CoreProcessor | ARM® Cortex®-M3 |
| CoreSize | 32-Bit Single-Core |
| Speed | 120MHz |
| Connectivity | CANbus, I²C, IrDA, LINbus, MMC, SPI, UART/USART, USB OTG |
| Peripherals | Brown-out Detect/Reset, DMA, I²S, LCD, POR, PWM, WDT |
| NumberofI/O | 114 |
| ProgramMemorySize | 512KB (512K x 8) |
| ProgramMemoryType | FLASH |
| RAMSize | 132K x 8 |
| Voltage-Supply(Vcc/Vdd) | 1.8V ~ 3.6V |
| DataConverters | A/D 24x12b; D/A 2x12b |
| OscillatorType | Internal |
| OperatingTemperature | -40°C ~ 105°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 144-LQFP |
概要
Description
STM32F205ZET7 is a mid/high-end MCU from ST’s STM32F2 family, built around an ARM Cortex‑M3 core. It targets higher performance and richer peripherals than STM32F1 devices.
Key points:
- Core and speed: Cortex‑M3 up to 120 MHz.
- Memory: up to 1 MB Flash and up to 128 KB RAM (depends on package/config).
- Peripherals: USB 2.0 OTG FS, CAN, SDIO, multiple UARTs/SPI/I2C, DMA, ADCs, timers; cryptography (AES/CRC) engine; external memory interface (FSMC); optional LCD controller on some variants.
- Package: 144-pin LQFP (ZET7 denotes package/industrial-temp/lead-free variants).
- Development: STM32CubeMX/HAL/LL libraries, CMSIS; supported by Keil, IAR, GCC; ST‑LINK for programming.
Use cases: embedded systems requiring USB, multiple peripherals, and higher performance (industrial, automation, consumer devices, motor control). For exact Flash/RAM counts and peripheral set, consult the official datasheet/reference manual for STM32F205ZET7.
Key points:
- Core and speed: Cortex‑M3 up to 120 MHz.
- Memory: up to 1 MB Flash and up to 128 KB RAM (depends on package/config).
- Peripherals: USB 2.0 OTG FS, CAN, SDIO, multiple UARTs/SPI/I2C, DMA, ADCs, timers; cryptography (AES/CRC) engine; external memory interface (FSMC); optional LCD controller on some variants.
- Package: 144-pin LQFP (ZET7 denotes package/industrial-temp/lead-free variants).
- Development: STM32CubeMX/HAL/LL libraries, CMSIS; supported by Keil, IAR, GCC; ST‑LINK for programming.
Use cases: embedded systems requiring USB, multiple peripherals, and higher performance (industrial, automation, consumer devices, motor control). For exact Flash/RAM counts and peripheral set, consult the official datasheet/reference manual for STM32F205ZET7.
Features
Key features of STM32F205ZET7:
- 32-bit ARM Cortex‑M3 core up to 120 MHz
- 256 KB Flash memory; 128 KB RAM
- USB 2.0 Full‑Speed OTG
- Ethernet MAC (10/100 Mbps) with DMA
- CAN 2.0, plus multiple USART/UART, SPI, I2C peripherals
- 12-bit ADC with up to 16 channels, up to ~2.4 MSPS
- Timers: advanced TIM1 plus general-purpose TIM2–TIM7, PWM features
- DMA: two controllers (DMA1 and DMA2)
- CRC engine; RTC and watchdogs
- Low‑power modes for power efficiency
- Operating voltage 1.7–3.6 V; industrial temperature range (-40 to 85°C)
- Debug/trace: SWD/JTAG debug interface; peripheral/packet accumulation options
Optional: absence of DAC on this variant is common; always check datasheet for exact peripheral counts per package.
- 32-bit ARM Cortex‑M3 core up to 120 MHz
- 256 KB Flash memory; 128 KB RAM
- USB 2.0 Full‑Speed OTG
- Ethernet MAC (10/100 Mbps) with DMA
- CAN 2.0, plus multiple USART/UART, SPI, I2C peripherals
- 12-bit ADC with up to 16 channels, up to ~2.4 MSPS
- Timers: advanced TIM1 plus general-purpose TIM2–TIM7, PWM features
- DMA: two controllers (DMA1 and DMA2)
- CRC engine; RTC and watchdogs
- Low‑power modes for power efficiency
- Operating voltage 1.7–3.6 V; industrial temperature range (-40 to 85°C)
- Debug/trace: SWD/JTAG debug interface; peripheral/packet accumulation options
Optional: absence of DAC on this variant is common; always check datasheet for exact peripheral counts per package.
Package
LQFP-144 (144-pin Quad Flat Package).
Pinout
- Pin count: 100-pin LQFP (LQFP-100) package
- Function: 32-bit ARM Cortex-M3 microcontroller (STM32F2 family) with integrated Flash/RAM and peripherals (USB OTG FS, CAN, SPI/I2C/UART, multiple timers, ADCs, etc.).
- Function: 32-bit ARM Cortex-M3 microcontroller (STM32F2 family) with integrated Flash/RAM and peripherals (USB OTG FS, CAN, SPI/I2C/UART, multiple timers, ADCs, etc.).
Manufacturer
- Manufacturer: STMicroelectronics (ST).
- What kind of company: A multinational semiconductor company (electronics) headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers (including the STM32 line), sensors, power devices, and other integrated circuits.
- What kind of company: A multinational semiconductor company (electronics) headquartered in Geneva, Switzerland, designing and manufacturing microcontrollers (including the STM32 line), sensors, power devices, and other integrated circuits.
Application
- Industrial automation and control systems
- Motor control and power electronics (BLDC/PMSM drives)
- USB device/host/OTG connectivity
- Embedded networking and gateways (Ethernet, CAN)
- Data acquisition, instrumentation and sensor interfaces
- HMI, display controllers and smart appliances
- IoT edge devices and consumer electronics
- Motor control and power electronics (BLDC/PMSM drives)
- USB device/host/OTG connectivity
- Embedded networking and gateways (Ethernet, CAN)
- Data acquisition, instrumentation and sensor interfaces
- HMI, display controllers and smart appliances
- IoT edge devices and consumer electronics
Equivalent
Direct ST equivalents (same core and 144-pin LQFP) are:
- STM32F207ZET7
- STM32F205ZET7
For different package options within the same family, you can also consider:
- STM32F207ZET6
- STM32F205ZET6
These share the Cortex-M3 core and similar peripherals.
- STM32F207ZET7
- STM32F205ZET7
For different package options within the same family, you can also consider:
- STM32F207ZET6
- STM32F205ZET6
These share the Cortex-M3 core and similar peripherals.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FZBI-08Q
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FM2I-10..
Macronix
-
MX25L12833FZNI-10..
Macronix