STGW40H120F2

画像は参照用のみです。

STGW40H120F2

IGBT 1200V 40A HS TO-247

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier STMicroelectronics
Package Tube
ProductStatus Active
IGBTType Trench Field Stop
Voltage-CollectorEmitterBreakdown(Max) 1200 V
Current-Collector(Ic)(Max) 80 A
Current-CollectorPulsed(Icm) 160 A
Vce(on)(Max)@VgeIc 2.6V @ 15V, 40A
Power-Max 468 W
SwitchingEnergy 1mJ (on), 1.32mJ (off)
InputType Standard
GateCharge 158 nC
Td(on/off)@25°C 18ns/152ns
TestCondition 600V, 40A, 10Ohm, 15V
OperatingTemperature -55°C ~ 175°C (TJ)
MountingType Through Hole
Package/Case TO-247-3

概要

Description

STGW40H120F2 is STMicroelectronics’ dual IGBT power module. It houses two high-voltage, high-current IGBTs with anti-parallel diodes in one package, rated about 1.2 kV and 40 A per device. The F2 suffix indicates the two-channel version used in compact inverters and motor drives. Applications include motor drives, inverters, UPS, and power supplies. It is typically mounted on an isolated baseplate and cooled by forced air or liquid cooling, designed for common heatsink configurations. Key features include rugged safe-operating-area, fast switching, and easy paralleling of devices within the module. For exact electricals (Vces, Ic, Vge, switching times), thermal data, and packaging, consult the official datasheet. This module is useful when space and wiring need to be minimized without sacrificing performance or reliability.

Features

STGW40H120F2 is a dual IGBT module with two IGBTs and two fast-recovery diodes. Key features:
- 1,200 V blocking voltage
- 40 A continuous current per switch
- Two IGBTs + two anti-parallel fast-recovery diodes in one half-bridge package
- Optimized for motor drives, inverters, solar, and UPS applications
- High dV/dt and low conduction losses for improved efficiency
- Fully isolated baseplate for easy heatsinking
- Wide operating temperature range (typical −40°C to +125°C)
- Pb-free/halogen-free packaging; suitable for standard gate-drive schemes
Note: For exact electrical specs (Vcesat, switching times, short-circuit withstand, etc.), refer to the datasheet.

Package

IPAK – an isolated power-module package (IGBT module).

Pinout

Pin count: 8 terminals (two power terminals plus six signal pins).
Function: STGW40H120F2 is a dual high-power IGBT module (two N-channel IGBTs with anti-parallel diodes), rated around 1200 V and 40 A, intended for use as a half-bridge/inverter switching leg in motor drive and power conversion applications.

Manufacturer

- Manufacturer: STMicroelectronics (ST)
- Company type: A multinational semiconductor and electronics company (global designer and manufacturer of ICs, discrete devices, power modules, MEMS/sensors, etc.), headquartered in Geneva, Switzerland.

Application

STGW40H120F2 is a 1200 V, 40 A IGBT module (two IGBTs/diodes in one package). Typical applications:
- Solar and other renewable-energy inverters
- AC motor drives (industrial and consumer)
- Uninterruptible power supplies (UPS) and DC–AC converters
- Inverter-based welding equipment
- Servo/stepper motor drive systems
- DC–DC converters and battery charging systems

Equivalent

STGW40H120F2 is a 1200 V, 40 A dual IGBT module. Common equivalents from other vendors include Infineon EconoDUAL 2 1200 V/40 A modules, Wolfspeed (Cree) 1200 V dual IGBT modules, and ON Semiconductor (Renesas) 1200 V dual IGBT modules with similar packaging. For exact cross-references, check ST’s cross-reference tool or distributor catalogs, as part numbers vary by package revision.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似