ST890CDR

画像は参照用のみです。

ST890CDR

IC PWR SWITCH P-CHANNEL 1:1 8SO

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 2.7V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 1.2A
RdsOn(Typ) 75mOhm
InputType Non-Inverting
FaultProtection Current Limiting (Adjustable), Over Temperature
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
SupplierDevicePackage 8-SOIC

概要

Description

I’m not recognizing a part named ST890CDR. It could be a misprint or a niche/obsolete part. If you can share a link, manufacturer, or the device category (MCU, DSP, PMIC, etc.), I can give a precise intro. Meanwhile, here’s a generic template you can use for an ST-branded MCU/SoC:
- What it is: A microcontroller/processor that combines a CPU core, memory, and peripherals for embedded control.
- Likely features to check: CPU core and speed, flash/RAM sizes, GPIO, UART/SPI/I2C, USB, ADC/DAC, timers/PWMs, power management, security features, clocking, operating voltage, temperature range, package type.
- Typical applications: motor control, sensing/automation, IoT, consumer electronics.
- Quick start: obtain the official datasheet/reference manual, use an evaluation board, install the IDE/toolchain, run a simple example (e.g., LED blink), configure clock/power, then flash and debug.
- Resources: datasheet, reference manuals, application notes, SDKs, forums, and dev kits.
If you share more details, I’ll tailor this with exact specs and steps.

Package

I don’t have the exact ST890CDR package type on hand. Please share the datasheet or confirm the device family (e.g., regulator, op-amp, MCU). With that, I can identify the package (SO-8, DIP-8, SOT-23, etc.).

Pinout

I don’t have the ST890CDR datasheet in memory. Please share the datasheet link or confirm the package type (e.g., SO-8, DIP-8) and I’ll give you the exact pin count and primary function.

Manufacturer

Manufacturer: STMicroelectronics (ST).
STMicroelectronics is a multinational semiconductor company (electronics manufacturer) based in Geneva, Switzerland. It designs and fabricates integrated circuits and semiconductor devices—including microcontrollers, analog ICs, MEMS sensors, and power devices—for automotive, industrial, and consumer markets.

Equivalent

ST890CDR is an STMicroelectronics 8-bit 8051‑family MCU. Direct equivalents include other 8051 MCUs with similar flash/RAM and peripherals. Common cross references: Atmel/Microchip AT89C51/AT89C52; NXP P89LPC9x. For an exact substitute, use ST’s cross-reference tool or distributor catalogs, and specify required memory, peripherals, I/O, and package.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似