SPD18P06P

画像は参照用のみです。

SPD18P06P

MOSFET P-CH 60V 18.6A TO252-3

  • メーカー
  • Mfr。パート #SPD18P06P
  • パッケージ
  • データシート
  • 在庫中2821

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Infineon Technologies,Rochester Electronics, LLC
Package Tape & Reel (TR),Cut Tape (CT),Bulk
Series SIPMOS®
ProductStatus Obsolete
FETType P-Channel
Technology MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss) 60 V
Current-ContinuousDrain(Id)@25°C 18.6A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn) 10V
RdsOn(Max)@IdVgs 130mOhm @ 13.2A, 10V
Vgs(th)(Max)@Id 4V @ 1mA
GateCharge(Qg)(Max)@Vgs 33 nC @ 10 V
Vgs(Max) ±20V
InputCapacitance(Ciss)(Max)@Vds 860 pF @ 25 V
PowerDissipation(Max) 80W (Tc)
OperatingTemperature -55°C ~ 175°C (TJ)
MountingType Surface Mount
SupplierDevicePackage PG-TO252-3

概要

Description

SPD18P06P is a model code, but without the manufacturer or datasheet it’s hard to give a precise intro. If SPD18P06P refers to a Surge Protective Device (SPD), a quick overview:
- Purpose: Protect equipment from transient overvoltages on AC/DC power lines.
- Construction: Often MOVs or TVS elements, with protection modes such as L-N, L-PE, N-PE.
- Ratings (typical): nominal operating voltage, maximum continuous operating voltage (MCOV), surge/current ratings (In, Imax), response time (very fast).
- Standards: Type 1/Type 2 classifications, coordination with electrical codes; mounting on DIN rails is common.
- Features: status indicators, fault/replace indicators, sometimes remote signaling.
The “18P06P” portion likely encodes series, pole count, enclosure size, or specific options, which vary by manufacturer. Share the manufacturer or a link to the datasheet for a precise introduction.

Features

SPD18P06P is a Schottky barrier rectifier (18 A, 60 V). Key features:
- VRRM: 60 V; IF(AV): 18 A
- Very low forward voltage drop (typ ~0.5 V at 18 A) for high efficiency
- Ultra-fast switching with negligible reverse recovery
- High surge/current capability for brief overloads
- Low leakage at rated temps
- Wide operating Temp range: typically -55°C to +150°C
- Pb-free, RoHS compliant
- Robust molded/plastic case suitable for surface-mount or through-hole variants
- Ideal for SMPS/DC-DC rectification, freewheeling, polarity protection, and other high-speed power applications

Package

The package type isn’t fixed for SPD18P06P; it varies by vendor. Check the specific datasheet. Common MOSFET packages include TO‑220, DPAK (TO‑252), and D2PAK (TO‑263). Please provide the manufacturer or datasheet link.

Pinout

SPD18P06P is a 3‑pin P‑channel MOSFET. Pins and functions:
- Gate (G): control terminal; voltage here turns the channel on/off.
- Drain (D): main current terminal where load connects.
- Source (S): supply/reference terminal (more positive for a P‑channel device).
When gate is pulled sufficiently below the source, the P‑channel device conducts from source to drain.

Application

SPD18P06P is a P-channel power MOSFET. Common applications include:
- High-side switching in DC power rails and load switches
- Battery protection and reverse-polarity protection
- Power-management in DC-DC converters (buck/boost, synchronous rectification)
- High-side switches in motor drivers
- Solar inverters, UPS, and other power-path applications
- Portable electronics power management and protection circuits
Note: use according to the device’s voltage/current specs.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似