SN74HCT574PWR

The SN74HCT574PWR is an octal D-type flip-flop designed for use in digital applications, particularly in data storage and transfer. It belongs to the Texas Instruments HCT series, which operates with a logic level compatible with TTL (Transistor-Transistor Logic) while using lower power and higher speed CMOS technology.
This device features eight D-type flip-flops that capture data on the rising edge of the clock input. It has a tri-state output, allowing for easy integration into bus systems. The SN74HCT574PWR operates with a supply voltage range of 2V to 5.5V and can function with a maximum propagation delay of about 12 ns at 5V, making it suitable for high-speed applications.
With its dual-functionality of data storage and controlled output, it is commonly used in applications such as memory devices, state machines, and data buffers. The PWR package indicates it comes in a TSSOP (Thin Shrink Small Outline Package) form, ideal for compact circuit designs.

The SN74HCT574PWR is an octal D-type flip-flop designed for high-speed digital applications. Key features include:
1. 8-bit Storage: It includes eight D-type flip-flops that can store 8 bits of data.
2. High-Speed Operation: It supports operation at high frequencies, making it suitable for fast data processing tasks.
3. TTL Compatible: The device is compatible with TTL (Transistor-Transistor Logic) levels, allowing it to interface easily with other TTL devices.
4. Edge-Triggered: The flip-flops are edge-triggered, which means they capture data on the rising or falling edge of the clock signal.
5. Asynchronous Clear: It features an asynchronous clear function that resets the flip-flops independently of the clock.
6. Wide Supply Voltage Range: Operates from a 4.5V to 5.5V power supply, enhancing flexibility in different applications.
7. Low Power Consumption: Designed for low power usage, improving energy efficiency in digital circuits.
These features make the SN74HCT574PWR ideal for use in data storage, synchronization, and control applications in various electronic systems.

The SN74HCT574PWR is packaged in a TSSOP (Thin Shrink Small Outline Package) format, specifically a 20-pin TSSOP package.

The SN74HCT574PWR is an octal D-type flip-flop with a 3-state output. It has a total of 20 pins. The key functions of the pins are as follows:
- Data Inputs (D0-D7): Pins 1-8, where data to be stored in the flip-flops is input.
- Clock Input (CLK): Pin 11, used to trigger the flip-flops on the rising edge.
- Output Enable (OE): Pin 10, active low control for enabling/disabling the outputs.
- Q Outputs (Q0-Q7): Pins 15-8, where the stored data is output.
- Set (PRE): Pin 9, active high asynchronous preset.
- Clear (CLR): Pin 12, active high asynchronous clear.
- VCC: Pin 20, power supply pin.
- GND: Pin 10, ground connection.
The device is suitable for digital circuits requiring temporary data storage and manipulation.

The SN74HCT574PWR is manufactured by Texas Instruments (TI), a prominent American technology company. Founded in 1930, Texas Instruments specializes in designing and manufacturing semiconductors and various integrated circuits. The company is known for its innovative products in analog, embedded processing, and digital signal processing, catering to a wide range of applications including industrial, automotive, communication, and consumer electronics. TI is also recognized for its commitment to research and development, helping advance technologies in the semiconductor industry.

The SN74HCT574PWR is a dual D-type flip-flop used in various applications including data storage, signal synchronization, and temporary data latching. Common areas include digital signal processing, memory storage, state machines, and interfacing between different logic levels in microcontroller projects. Its versatility allows for use in communication systems, timing applications, and control circuits.

Equivalent products to the SN74HCT574PWR include the 74HC574, 74HCT574, and other members of the 74xx series with similar functionality and logic levels. Ensure the voltage levels and specifications match your application needs. Always check the manufacturer's datasheets for detailed compatibility and performance characteristics.