SN65HVD235DR

The SN65HVD235DR is a high-speed CAN (Controller Area Network) transceiver designed for robust communication in automotive and industrial applications. It operates in a differential signaling mode, which enhances noise immunity and allows for reliable data transmission over long distances. The device supports data rates up to 1 Mbps and is compatible with the ISO 11898-2 standard.
Key features include a wide operating voltage range (4.5 to 5.5 V), low power consumption, and thermal shutdown protection. The transceiver also provides a low-power standby mode, making it suitable for battery-operated devices. Its small footprint and surface-mount package (SOP) facilitate easy integration into various circuit designs.
The SN65HVD235DR is ideal for applications that require reliable communication in harsh environments, such as automotive networks, industrial automation, and medical devices. Its robust design and high performance make it a popular choice among engineers designing CAN-based systems.

The SN65HVD235DR is a transceiver designed for high-speed, half-duplex CAN (Controller Area Network) communication. Key features include:
1. Data Rate: Supports data rates up to 1 Mbps.
2. Voltage Supply: Operates from a supply voltage of 4.5V to 5.5V.
3. Termination: Integrated 120-ohm termination resistor for improved signal integrity.
4. Low Power Consumption: Features low-power standby mode, enhancing efficiency.
5. Thermal Protection: Built-in thermal shutdown for reliable operation under varying conditions.
6. Common Mode Range: Wide common-mode voltage range, allowing for robust communication in noisy environments.
7. Compatible Standards: Complies with ISO 11898-2 standards for CAN communication.
8. Pin Compatibility: Designed for easy integration with existing designs, featuring standard pin configurations.
9. Fault Tolerance: Enhanced fault detection and protection mechanisms.
These features make the SN65HVD235DR suitable for automotive, industrial, and communication applications requiring reliable data transmission.

The SN65HVD235DR is packaged in a TSSOP (Thin Shrink Small Outline Package) with 8 pins.

The SN65HVD235DR is a CAN transceiver with a total of 8 pins. Its pin functions are as follows:
1. TXD (Pin 1): Transmit Data Input
2. RXD (Pin 2): Receive Data Output
3. Vcc (Pin 3): Supply Voltage
4. GND (Pin 4): Ground
5. CANH (Pin 5): CAN High Bus Line
6. CANL (Pin 6): CAN Low Bus Line
7. STB (Pin 7): Standby Mode Control
8. R0 (Pin 8): Unused, typically not connected
The SN65HVD235DR operates in differential signaling, making it suitable for robust communication in noisy environments, such as automotive and industrial applications. Its standby mode allows for power-saving features when the device is not actively communicating.

The SN65HVD235DR is manufactured by Texas Instruments (TI), a leading semiconductor company based in the United States. Texas Instruments designs and produces a wide range of analog and digital semiconductor solutions, including integrated circuits (ICs), microcontrollers, and processors. The company is well-known for its innovations in various fields, such as automotive, industrial, communication, and consumer electronics. TI is recognized for its commitment to quality, reliability, and technological advancement in electronic components, making it a key player in the global electronics market. The SN65HVD235DR is specifically a CAN transceiver, used in Controller Area Network (CAN) applications for robust communication in automotive and industrial systems.

The SN65HVD235DR is a CAN transceiver used in various application areas including automotive networks, industrial automation, building automation, and medical equipment. It facilitates reliable communication in harsh environments, making it suitable for control systems, IoT devices, and robotics. Its robust design supports high-speed data transmission and noise immunity, essential for real-time applications in these sectors.

The SN65HVD235DR is a CAN transceiver. Equivalent products include the MCP2551, TJA1050, PCA82C250, and the ISO1042. These alternatives offer similar functionality and performance for CAN communication applications. Always verify pin compatibility and specific electrical characteristics before substitution.