画像は参照用のみです。
PN7160A1HN/C100E
IC NFC CONTROLLER I2C HVQFN40
- メーカー
- Mfr。パート #PN7160A1HN/C100E
- パッケージ 40-VFQFN Exposed Pad
- データシート
- 在庫中5860
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | NXP USA Inc. |
| Package | Tray |
| ProductStatus | Active |
| Type | RFID Reader |
| Frequency | 13.56MHz |
| Standards | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Interface | I²C |
| Voltage-Supply | 1.65V ~ 1.95V, 3V ~ 3.6V |
| OperatingTemperature | -25°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 40-VFQFN Exposed Pad |
概要
Description
PN7160A1HN/C100E is NXP’s PN7160 NFC controller IC. It provides an integrated RF front-end and protocol stack to enable NFC reader/writer, card emulation, and peer-to-peer modes for multiple standards.
Key points:
- Protocols: NFC Forum Type A/B, FeliCa, and ISO/IEC 15693 (supporting cards/tags and mobile devices).
- Modes: Reader/Writer, Card Emulation (HCE), and Peer-to-Peer.
- Host interface: I2C or SPI to a microcontroller; handles RF field, anti-collision, timing, etc.
- Security: hardware cryptography (AES/DES), RNG, and secure-data handling for secure elements and HCE.
- Packaging/variant: A1HN denotes the package variant; C100E specifies a temperature/revision grade.
Typical applications:
- Embedded NFC readers in POS terminals and access control
- NFC-enabled devices and tags
- Smart posters and tag/card emulation use cases
Quick integration:
- Connect power, I2C/SPI, IRQ, and RST to the host MCU
- Add RF matching network
- Load firmware and run an NFC stack on the host or via PN7160’s firmware
Note: verify exact electricals and packaging in the latest datasheet.
Key points:
- Protocols: NFC Forum Type A/B, FeliCa, and ISO/IEC 15693 (supporting cards/tags and mobile devices).
- Modes: Reader/Writer, Card Emulation (HCE), and Peer-to-Peer.
- Host interface: I2C or SPI to a microcontroller; handles RF field, anti-collision, timing, etc.
- Security: hardware cryptography (AES/DES), RNG, and secure-data handling for secure elements and HCE.
- Packaging/variant: A1HN denotes the package variant; C100E specifies a temperature/revision grade.
Typical applications:
- Embedded NFC readers in POS terminals and access control
- NFC-enabled devices and tags
- Smart posters and tag/card emulation use cases
Quick integration:
- Connect power, I2C/SPI, IRQ, and RST to the host MCU
- Add RF matching network
- Load firmware and run an NFC stack on the host or via PN7160’s firmware
Note: verify exact electricals and packaging in the latest datasheet.
Features
Here are the typical features of PN7160A1HN/C100E (NXP NFC Front-End):
- 13.56 MHz NFC front-end transceiver
- Supports ISO/IEC 14443 Type A/B and ISO/IEC 15693
- NFC Forum-compliant Tag emulation, Read/Write, and Peer-to-Peer (NFCIP-1)
- Card/tag compatibility: MIFARE DESFire (EV1/EV2), DESFire, Classic, and FeliCa (where firmware supports)
- Host interface options: SPI and I²C (configurable, MCU integration)
- RF field generation, automatic impedance matching, field detection and communication control
- Low-power modes with wake-on-field capability
- Industrial-grade temperature range (typical for A1/HN variants)
- Small-footprint package (A1HN) suitable for compact designs
Note: exact supported card types and crypto features can depend on firmware and revision; verify against the specific datasheet for PN7160A1HN/C100E.
- 13.56 MHz NFC front-end transceiver
- Supports ISO/IEC 14443 Type A/B and ISO/IEC 15693
- NFC Forum-compliant Tag emulation, Read/Write, and Peer-to-Peer (NFCIP-1)
- Card/tag compatibility: MIFARE DESFire (EV1/EV2), DESFire, Classic, and FeliCa (where firmware supports)
- Host interface options: SPI and I²C (configurable, MCU integration)
- RF field generation, automatic impedance matching, field detection and communication control
- Low-power modes with wake-on-field capability
- Industrial-grade temperature range (typical for A1/HN variants)
- Small-footprint package (A1HN) suitable for compact designs
Note: exact supported card types and crypto features can depend on firmware and revision; verify against the specific datasheet for PN7160A1HN/C100E.
Package
The "/C100E" suffix denotes tape-and-reel shipping (carrier reel, typically 1,000 pcs). For the IC package type (exact LGA/WLCSP/QFN variant and dimensions), please refer to the PN7160 datasheet or NXP ordering information.
Pinout
Pin count: 48 pins (HVQFN package).
Function: PN7160A1HN/C100E is an NFC front-end/controller IC (RF transceiver plus protocol engine) for contactless smart cards (ISO/IEC 14443 Type A/B, ISO/IEC 15693, FeliCa). It interfaces to a host MCU via SPI (and typically I2C), providing the 13.56 MHz RF front end and protocol processing for NFC/RFID applications.
Function: PN7160A1HN/C100E is an NFC front-end/controller IC (RF transceiver plus protocol engine) for contactless smart cards (ISO/IEC 14443 Type A/B, ISO/IEC 15693, FeliCa). It interfaces to a host MCU via SPI (and typically I2C), providing the 13.56 MHz RF front end and protocol processing for NFC/RFID applications.
Manufacturer
Manufacturer: NXP Semiconductors N.V. (commonly “NXP”).
What kind of company: NXP is a global Dutch semiconductor manufacturer that designs and supplies mixed-signal and digital integrated circuits and secure connectivity solutions (including NFC/RFID controllers, microcontrollers, processors and automotive, industrial and IoT semiconductor products).
What kind of company: NXP is a global Dutch semiconductor manufacturer that designs and supplies mixed-signal and digital integrated circuits and secure connectivity solutions (including NFC/RFID controllers, microcontrollers, processors and automotive, industrial and IoT semiconductor products).
Application
PN7160A1HN/C100E is an NFC controller front-end for embedded systems. Applications include:
- Reading/writing contactless cards and tags (ISO 14443/15693)
- Payment, loyalty and access-control terminals
- Transit ticketing and e-ID systems
- Secure identity/authentication in embedded devices
- NFC data exchange in IoT, wearables and smart posters
- Reading/writing contactless cards and tags (ISO 14443/15693)
- Payment, loyalty and access-control terminals
- Transit ticketing and e-ID systems
- Secure identity/authentication in embedded devices
- NFC data exchange in IoT, wearables and smart posters
Equivalent
Direct equivalents to the NXP PN7160A1HN/C100E include NXP PN7150 and PN5180 (NFC controller/reader families), STMicroelectronics ST25R3916 / ST25R3911B (high‑performance NFC readers), Sony RC‑S series modules, and Broadcom/CSR NFC controller families. Select by required interface (I2C/SPI), HCI/firmware and secure‑element support.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25L3233FZBI-08Q
Macronix
-
MX66U1G45GXDI00
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V2033FM1I
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX25L25645GXDI-08..
Macronix