PIC18F46K20-I/P

画像は参照用のみです。

PIC18F46K20-I/P

IC MCU 8BIT 64KB FLASH 40DIP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tube
Series PIC® XLP™ 18K
ProductStatus Active
CoreProcessor PIC
CoreSize 8-Bit
Speed 64MHz
Connectivity I²C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, HLVD, POR, PWM, WDT
NumberofI/O 35
ProgramMemorySize 64KB (32K x 16)
ProgramMemoryType FLASH
EEPROMSize 1K x 8
RAMSize 3.8K x 8
Voltage-Supply(Vcc/Vdd) 1.8V ~ 3.6V
DataConverters A/D 14x10b
OscillatorType Internal
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Through Hole
Package/Case 40-DIP (0.600, 15.24mm)

概要

Description

The PIC18F46K20-I/P is a mid‑range 8‑bit Microchip PIC microcontroller in a 40‑pin Plastic DIP package (the I/P suffix indicates a Plastic DIP through‑hole package). It uses the PIC18F core, runs up to about 40 MHz (roughly 10 MIPS), and contains on‑chip Flash program memory, RAM for data, and EEPROM for non‑volatile storage. It provides a rich peripheral set, including ADC (multiple channels), timers, PWM/ CCP modules, comparators, and serial communications (USART/UART, SPI, I2C/MSSP). It also supports standard features like watchdog timer and brown‑out/reset circuits. The device is programmed via ICSP and works with Microchip’s MPLAB X IDE and XC8/C18 toolchains. Typical applications include embedded control, data acquisition, sensor interfacing, small automation tasks, and consumer electronics. For exact memory sizes, pin count options, and peripheral counts, consult the datasheet for the specific package variant.

Features

Here are the key features of the PIC18F46K20-I/P (40‑pin PDIP, Industrial temp):
- 8-bit PIC18 core, up to 40 MHz oscillator for ~10 MIPS
- Memory: about 64 KB Flash, ~4 KB RAM, ~256 B EEPROM
- I/O: ~30+ I/O pins (40-pin package)
- Analog: 10-bit ADC with up to 10 channels
- Timers: multiple timers (8/16‑bit: T0/T1/T2/T3 variants)
- PWM/CCP: Enhanced CCP modules with PWM outputs (multiple channels)
- Communication: MSSP module with SPI and I2C; 2 UARTs (EUSART)
- Peripherals: essential peripherals including comparators, capture/compare features
- Power/operating: Brown‑out reset, watchdog timer, MCLR, LVD
- Low‑power modes: sleep modes for power efficiency
- Clock options: flexible clocking with internal/external sources
- Package: Industrial temp PDIP 40-pin (I/P suffix)
Note: exact RAM/EEPROM sizes and peripheral counts vary slightly by revision; this summarizes the typical feature set of the PIC18F46K20-I/P.

Package

Industrial temperature range Plastic DIP package (PDIP), i.e., through-hole DIP.

Pinout

- Pin count: 40-pin DIP (I/P = Industrial temp, Plastic DIP).
- Function: Microcontroller (8-bit PIC18F46K20) for embedded control, with on-chip flash RAM/EEPROM and peripherals (timers, ADC, PWM/CCP, USART/SPI/I2C, I/O ports) for general purpose applications.

Manufacturer

- Manufacturer: Microchip Technology Inc.
- Company type: An American multinational semiconductor company that designs, develops, and manufactures microcontrollers and other integrated circuits (analog, memory, etc.).

Application

Typical applications for PIC18F46K20-I/P include:
- USB-enabled embedded control and data logging
- Consumer electronics, home appliances and peripherals
- Industrial automation, process control and data acquisition
- Sensor interfacing, instrumentation and handheld/portable instruments
- Prototyping, education and OEM embedded controllers

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似