画像は参照用のみです。

PDTC114ET-QR

Name: PDTC114ET-QR
Rating: 4.7 (12 reviews)

TRANS PREBIAS NPN/PNP

メーカー
Mfr。パート #PDTC114ET-QR
パッケージ TO-236-3, SC-59, SOT-23-3
データシート
在庫中5631

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier	Nexperia USA Inc.
Package	Bulk
Series	Automotive, AEC-Q101
ProductStatus	Active
TransistorType	NPN - Pre-Biased
Current-Collector(Ic)(Max)	100 mA
Voltage-CollectorEmitterBreakdown(Max)	50 V
Resistor-Base(R1)	10 kOhms
Resistor-EmitterBase(R2)	10 kOhms
DCCurrentGain(hFE)(Min)@IcVce	30 @ 5mA, 5V
VceSaturation(Max)@IbIc	150mV @ 500µA, 10mA
Current-CollectorCutoff(Max)	1µA
Frequency-Transition	230 MHz
Power-Max	250 mW
MountingType	Surface Mount
Package/Case	TO-236-3, SC-59, SOT-23-3

概要

Description

PDTC114ET-QR is a digital transistor: an NPN transistor with an integrated base resistor. This lets you drive the device directly from logic signals (TTL/CMOS) without needing an external base resistor. The -QR suffix denotes Tape & Reel packaging for automated assembly.
Typical use: act as a small switching driver for loads such as LEDs, relays, or optocouplers, sinking current from a load connected to a supply.
Key points:
- Built-in base resistor provides safe, fixed base current for logic inputs.
- It functions as a convenient, compact switch with simplified wiring.
- Packaging and exact internal resistor value depend on the exact variant; check the datasheet for V_CE, I_C, and pinout.
For precise electrical specs (maximum collector-emitter voltage, continuous collector current, input current, gain, and package type), consult the manufacturer’s datasheet for PDTC114ET-QR.

Features

PDTC114ET-QR is a digital NPN transistor with built-in base resistor. Key features:
- Built-in base resistor: no external base resistor required; logic-level drive from MCU.
- Logic compatibility: can be driven directly from 3.3/5 VLogic signals.
- I_C(max): typically around 50 mA; V_CE(max) up to about 40 V.
- Low saturation: V_CE(sat) ~0.2–0.3 V at moderate I_C.
- Fast switching suitable for general switching applications.
- Package: SOT-23-3 with Tape & Reel (QR) packaging; RoHS compliant.
- Applications: driving LEDs, small relays, and other low-power loads in microcontroller circuits.

Package

PDTC114ET-QR uses a SOT-23 (3-pin) package. The “-QR” suffix signifies Tape & Reel packaging.

Pinout

- Pin count: 3 pins
- Function: NPN digital transistor with a built-in base resistor. Pin 1 = Base (input, with internal resistor), Pin 2 = Collector, Pin 3 = Emitter. -QR indicates tape-and-reel packaging (SOT-23).

Manufacturer

- Manufacturer: Panasonic (Matsushita Electric Industrial Co., Ltd.), specifically Panasonic Semiconductor Solutions.
- What kind of company: A Japanese multinational electronics company that designs and manufactures consumer electronics and a wide range of electronic components, including semiconductors.

Application

PDTC114ET-QR is a digital NPN transistor with a built-in base resistor (SMD, tape & reel). Applications:
- Direct drive of LEDs
- Driving relay coils
- Driving optocouplers
- Logic/interface circuits from microcontrollers
- General-purpose low-side switching of small loads in consumer, automotive, and industrial electronics
Advantage: simplifies gate drive, reduces external components, enables compact designs.

Equivalent

PDTC114ET-QR is an NPN digital transistor with a built‑in base resistor. Direct cross references from major vendors include:
- Rohm: DTC114E (and DTC114EK in SOT‑23)
- Renesas: DTC114E
- ON Semiconductor: DTC114E series
For exact cross (same base‑resistor value and footprint), check distributor cross‑references (DigiKey/Mouser) and match package and base‑resistor spec.