OP07DP

画像は参照用のみです。

OP07DP

  • メーカー
  • Mfr。パート #OP07DP
  • パッケージ
  • データシート
  • 在庫中2725

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tube
ProductStatus Obsolete
AmplifierType General Purpose
NumberofCircuits 1
SlewRate 0.3V/µs
GainBandwidthProduct 600 kHz
Current-InputBias 12 nA
Voltage-InputOffset 150 µV
Voltage-SupplySpan(Min) 6 V
Voltage-SupplySpan(Max) 36 V
OperatingTemperature 0°C ~ 70°C (TA)
MountingType Through Hole
Package/Case 8-DIP (0.300, 7.62mm)

概要

Description

OP07DP is the dual version of the OP07 precision op-amp, housed in a DIP-8 package. It contains two identical, high-accuracy amplifiers designed for low offset, low drift, and low noise—ideal for precision instrumentation and sensor conditioning.
Key points:
- Very low input offset voltage (tens to hundreds of microvolts) and low offset drift with temperature.
- Low input bias current and high open-loop gain for accurate DC amplification.
- Moderate bandwidth and slew rate; not a high-speed, rail-to-rail device.
- Typically used with dual supplies (e.g., ±5 to ±15 V); output swing and common-mode range are limited near the rails.
Common applications:
- Precision DC amplification and instrumentation
- Active filters and integrators
- ADC front-end conditioning and sensor interfaces
Packages and pinout:
- Dual op-amp in DIP-8 (two amplifiers per package)
Note: Always consult the specific OP07DP datasheet for exact electrical characteristics, supply limits, and pin assignments for your variant.

Features

OP07DP features (dual precision op-amp in DIP-8 plastic package):
- Dual, high-precision op-amp for DC accuracy and signal conditioning
- Very low input-offset voltage with low drift
- Low input-bias current and low input-noise
- High open-loop gain and good DC accuracy
- Moderate bandwidth suitable for instrumentation, active filters, and servo apps
- Stable over a wide temperature range (good temperature stability)
- Flexible supply operation (usable with dual or single supplies within standard ranges)
- Pin-compatible DIP packaging (DP indicates dual in DIP-8) for easy replacement in legacy designs
Note: Exact electrical specs (offset, drift, noise, GBP, slew rate, supply range) vary by variant and must be checked in the specific datasheet.

Package

OP07DP is the plastic DIP version of the OP07 — an 8-pin DIP (DIP-8) through-hole package.

Pinout

- Pin count: 8 pins (DIP-8 package).
- Function: Dual precision operational amplifier (OP07 family) with low offset and low drift for precision signal amplification (requires dual supply).

Manufacturer

OP07DP is manufactured by Analog Devices, Inc. (ADI). Analog Devices is a multinational American semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits, including precision op-amps.

Application

OP07DP is a dual precision op-amp. Common applications:
- High-precision instrumentation and measurement front-ends
- Sensor signal conditioning with low offset and drift
- DC and low-frequency amplification
- Precision integrators and active filters
- Servo loops and control circuitry
- Instrumentation amplifiers and buffering in test equipment

Equivalent

Equivalents to OP07DP (dual low‑offset precision op-amp) include:
- LT1013 (Linear Technology) – dual
- LT1012 (Linear Technology) – single
- OP27/OP27G (Analog Devices/Burr-Brown) – single
- OPA277 / OPA277A (Texas Instruments) – single
- OP07D/OP07 family variants from Analog Devices (pinout differences; verify)
Note: pinouts differ, so check datasheets before substitution.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似