NCV7240ADPR2G

画像は参照用のみです。

NCV7240ADPR2G

IC PWR DRIVER N-CHAN 1:8 24SSOP

  • メーカー
  • Mfr。パート #NCV7240ADPR2G
  • パッケージ 24-SSOP
  • データシート
  • 在庫中5781

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Obsolete
SwitchType General Purpose
NumberofOutputs 8
Ratio-Input:Output 1:8
OutputConfiguration Low Side
OutputType N-Channel
Interface SPI
Voltage-Load 3.3V, 5V
Current-Output(Max) 600mA
RdsOn(Typ) 1.5Ohm
FaultProtection Open Load Detect, Over Temperature
OperatingTemperature -40°C ~ 150°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 24-SSOP

概要

Description

NCV7240ADPR2G is an automotive-grade smart high-side switch (load switch) from ON Semiconductor. It provides protected, controlled power to a single load in 12/24V automotive environments, with built-in protections and diagnostics.
Key points:
- Single-channel high-side switch: IN controls OUT to the load.
- Protective features: current limiting, short-circuit/overcurrent protection, thermal shutdown, reverse polarity protection, and undervoltage/overvoltage protection.
- Diagnostics: fault/diagnostic status output to report fault conditions to a microcontroller.
- Packaging/variant: ADPR2G denotes a specific package/reel variant of the NCV7240 family.
Uses: simple, robust driving of automotive loads (lamps, motors, pumps) with minimal external components.
Note: Exact electrical specs (current limit, on-resistance, propagation delay, fault latencies) vary by variant. See the latest datasheet for precise figures and the recommended application circuits. Would you like a quick datasheet link or a comparison with similar NCV parts?

Package

8-pin SOIC (SOP-8) package; RoHS-compliant, reel code R2G.

Pinout

- Pin count: 8 pins (8-pin package such as SOIC-8/TSSOP-8).
- Function: Automotive LIN transceiver (physical layer) that interfaces a microcontroller to a LIN bus; provides bus driver/receiver, TXD/RXD interface to the controller, plus power, ground, wake/standby and protection features.

Manufacturer

- Manufacturer: NXP Semiconductors
- Company type: Dutch multinational semiconductor company that designs and manufactures integrated circuits for automotive, industrial, and consumer electronics.

Application

NCV7240ADPR2G is a LIN transceiver for automotive use. Typical application areas include:
- Automotive body electronics and control modules (doors, lighting, HVAC, seats, instrument clusters)
- Sensor/actuator networks and gateway nodes
- Any 12-V automotive LIN bus interface requiring robust data exchange with protections (ESD/short-circuit) and fail-safe behavior.

Equivalent

I can provide exact cross-references, but I need the device function and specs. NCV7240ADPR2G could be a high‑side switch, regulator, or transceiver; equivalents depend on voltage/current and package. Please share the datasheet or confirm the intended function and key ratings (voltage, current, etc.). I’ll list exact equivalents from TI, ST, NXP/Nexperia, Renesas, Infineon.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照(DHL/FedEx):

DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100%前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送