画像は参照用のみです。

MX25L25645GM2I-10G

Name: MX25L25645GM2I-10G
Rating: 4.7 (12 reviews)

IC FLASH 256MBIT SPI 120MHZ 8SOP

メーカー
Mfr。パート #MX25L25645GM2I-10G
パッケージ
データシート
在庫中6505

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Series	MXSMIO™
Part Status	Not For New Designs
Base Product Number	MX25L25645
DigiKey Programmable	Not Verified
Memory Type	Non-Volatile
Memory Format	FLASH
Technology	FLASH - NOR
Memory Size	256Mbit
Memory Organization	32M x 8
Memory Interface	SPI
Clock Frequency	120 MHz
Write Cycle Time - Word, Page	30µs, 750µs
Voltage - Supply	2.7V ~ 3.6V
Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount
Package	8-SOIC (0.209", 5.30mm Width)
Supplier Device Package	8-SOP
Packaging	Tube

概要

Description

The MX25L25645GM2I-10G is a high-performance serial NOR Flash memory chip from Macronix, featuring a storage capacity of 256 Mbit (32 MB). It uses a Quad SPI interface, allowing for fast data transfer rates, up to 104 MHz. The device operates on a voltage range of 2.7V to 3.6V, making it suitable for a wide range of applications, including embedded systems, consumer electronics, and automotive devices.
Key features include deep power-down mode for low power consumption, 100,000 program/erase cycles, and a data retention of 20 years. The chip supports various commands for reading, writing, and erasing data, including a fast read command that enhances performance. Its small footprint and compatibility with various microcontrollers make it ideal for applications requiring efficient data storage solutions. The MX25L25645GM2I-10G is widely used in firmware storage, code shadowing, and other applications necessitating reliable non-volatile memory.

Features

The MX25L25645GM2I-10G is a 256Mb (32MB) serial NOR Flash memory chip from Macronix, featuring the following key specifications:
1. Memory Density: 256 Megabits (32 Megabytes).
2. Interface: SPI (Serial Peripheral Interface) with Dual and Quad I/O support for faster data transfer.
3. Speed: Operates at a clock frequency of up to 133 MHz.
4. Voltage Range: Wide operating voltage of 2.7V to 3.6V, suitable for various applications.
5. Endurance: Supports up to 100,000 program/erase cycles per sector.
6. Data Retention: Retains data for a minimum of 20 years.
7. Package Options: Available in a 16-pin SOIC, WSON, or 8-pin VDFN package.
8. Security Features: Includes OTP (One-Time Programmable) areas and hardware write protection.
9. Applications: Ideal for embedded systems, consumer electronics, IoT devices, and automotive applications.
These features make the MX25L25645GM2I-10G a reliable choice for a variety of storage solutions.

Package

The MX25L25645GM2I-10G is housed in a SOIC-8 package type.

Pinout

The MX25L25645GM2I-10G is a 256 Mbit (32 MB) Serial NOR Flash memory device with a total of 8 pins. The pin functions are as follows:
1. CS# (Chip Select): Active low signal used to enable the device.
2. SO (Serial Output): Data output pin for serial communication.
3. SI (Serial Input): Data input pin for serial communication.
4. SCK (Serial Clock): Clock input pin that controls the data transfer rate.
5. WP# (Write Protect): Active low signal to enable write protection.
6. HOLD#: Active low signal to pause the operation without deselecting the device.
7. VCC: Power supply pin.
8. GND: Ground reference pin.
This device operates with a clock frequency of up to 104 MHz and supports standard and dual SPI modes.

Manufacturer

The manufacturer of the MX25L25645GM2I-10G is Macronix International Co., Ltd. Macronix is a semiconductor company based in Taiwan, specializing in the design, development, and manufacture of non-volatile memory products, including NOR flash memory and NAND flash memory. The company serves various applications such as consumer electronics, automotive, industrial, and communications. Established in 1989, Macronix is recognized for its focus on high-performance memory solutions and has a significant presence in the global semiconductor market.

Application

The MX25L25645GM2I-10G is a 256Mb serial NOR Flash memory suitable for various applications, including boot code storage, firmware updates, and data logging in consumer electronics, automotive systems, IoT devices, and networking equipment. Its compatibility with SPI interface makes it ideal for applications requiring fast read speeds and low power consumption, such as mobile devices, smart home products, and industrial automation.

Equivalent

The MX25L25645GM2I-10G is a 256 Mb (32 MB) serial NOR Flash memory. Equivalent products include:
1. Winbond W25Q256JV - 256 Mb Serial NOR Flash.
2. Micron MT25QL256ABA - 256 Mb Serial NOR Flash.
3. Spansion S25FL256S - 256 Mb Serial NOR Flash.
Ensure compatibility with your specific application requirements regarding voltage, speed, and interface.