画像は参照用のみです。
MRF24J40MAT-I/RM
RX TXRX MOD 802.15.4 TRC ANT SMD
- メーカー
- Mfr。パート #MRF24J40MAT-I/RM
- パッケージ
- データシート
- 在庫中2617
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Microchip Technology |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| RFFamily/Standard | 802.15.4 |
| Protocol | Zigbee® |
| Frequency | 2.4GHz |
| DataRate | 250kbps |
| Power-Output | 0dBm |
| Sensitivity | -94dBm |
| SerialInterfaces | SPI |
| AntennaType | Integrated, Trace |
| Voltage-Supply | 2.4V ~ 3.6V |
| Current-Receiving | 19mA |
| Current-Transmitting | 23mA |
| MountingType | Surface Mount |
| OperatingTemperature | -40°C ~ 85°C |
概要
Description
MRF24J40MAT-I/RM is Microchip’s 2.4 GHz IEEE 802.15.4 radio transceiver. It provides the RF front end and PHY for 802.15.4-based networks (e.g., ZigBee, MiWi) and is designed to pair with a host MCU via SPI.
Key points:
- 2.4 GHz ISM band, 250 kbps data rate, DSSS/O-QPSK modulation
- SPI interface (SCK, SI, SO, CS) plus interrupt lines; supports hardware CRC and frame handling
- Host MCU handles higher-layer MAC with Microchip stacks (MiWi, ZigBee) or your own 802.15.4 MAC
- Power: typically 3.3 V; variants like -I indicate industrial temperature range; -RM denotes RoHS/compliant packaging
- Useful for wireless sensor networks, home/industrial automation, remote monitoring
Getting started:
- Connect to MCU over SPI, provide 3.3 V, handle IRQs
- Use Microchip’s example code/stacks to configure channel, PAN ID, addresses, and network parameters
- Integrate with your application layer to form a network
Note: It is a transceiver module, not a full MCU or network stack by itself.
Key points:
- 2.4 GHz ISM band, 250 kbps data rate, DSSS/O-QPSK modulation
- SPI interface (SCK, SI, SO, CS) plus interrupt lines; supports hardware CRC and frame handling
- Host MCU handles higher-layer MAC with Microchip stacks (MiWi, ZigBee) or your own 802.15.4 MAC
- Power: typically 3.3 V; variants like -I indicate industrial temperature range; -RM denotes RoHS/compliant packaging
- Useful for wireless sensor networks, home/industrial automation, remote monitoring
Getting started:
- Connect to MCU over SPI, provide 3.3 V, handle IRQs
- Use Microchip’s example code/stacks to configure channel, PAN ID, addresses, and network parameters
- Integrate with your application layer to form a network
Note: It is a transceiver module, not a full MCU or network stack by itself.
Features
Key features of MRF24J40MAT-I/RM (IEEE 802.15.4 2.4 GHz transceiver with MAC/PHY):
- IEEE 802.15.4 compliant PHY/MAC at 2.4 GHz, 250 kbps O-QPSK with DSSS
- Integrated RF front-end: power amplifier, LNA, mixer, and PLL synthesizer (no external RF parts required)
- 16 channels in the 2.4 GHz band (channels 11–26)
- Hardware CSMA/CA, auto-ACK, frame filtering, and CRC-16 for IEEE 802.15.4 framing
- SPI interface to host MCU (3.3V logic); IRQ/interrupt support
- Power options: single-supply 1.8–3.6V; supports low-power sleep modes
- Suitable for ZigBee, Smart Energy, 6LoWPAN, and other 802.15.4-based applications
- Package MAT-I/RM is a surface-mount/molded package variant (compact module form)
Note: For exact supply current, voltage ranges, and pinout, refer to the latest datasheet.
- IEEE 802.15.4 compliant PHY/MAC at 2.4 GHz, 250 kbps O-QPSK with DSSS
- Integrated RF front-end: power amplifier, LNA, mixer, and PLL synthesizer (no external RF parts required)
- 16 channels in the 2.4 GHz band (channels 11–26)
- Hardware CSMA/CA, auto-ACK, frame filtering, and CRC-16 for IEEE 802.15.4 framing
- SPI interface to host MCU (3.3V logic); IRQ/interrupt support
- Power options: single-supply 1.8–3.6V; supports low-power sleep modes
- Suitable for ZigBee, Smart Energy, 6LoWPAN, and other 802.15.4-based applications
- Package MAT-I/RM is a surface-mount/molded package variant (compact module form)
Note: For exact supply current, voltage ranges, and pinout, refer to the latest datasheet.
Package
Package type: QFN (Quad Flat No-Lead), 28-pin, 4×4 mm, RoHS-compliant (MAT-I/RM variant).
Pinout
Pin count: 32 pins.
Primary pin functions (summary):
- Power/Ground: VDD (power), VSS (ground), VREG_EN/AVDD pins for on‑chip regulator and analog supply.
- RF/antenna: RF I/O (antenna/50Ω interface).
- SPI host interface: SDI/MOSI, SDO/MISO, SCK, CS/SS for MCU communication.
- Control/status: RESET, IRQ (interrupt output), SLP/WAKE (sleep control).
- GPIOs: several general-purpose I/O pins usable for LEDs/buttons or peripheral signaling.
- Clock/XTAL: pins for an external 32 MHz crystal or clock input (or internal oscillator selection).
- Misc/test: configuration/strapping and reserved/test pins for factory/debug.
These map to the IEEE 802.15.4 2.4 GHz transceiver functions: RF front end, MAC/PHY controller, SPI host interface, power management and GPIOs. For a full pin-by-pin table see the device datasheet.
Primary pin functions (summary):
- Power/Ground: VDD (power), VSS (ground), VREG_EN/AVDD pins for on‑chip regulator and analog supply.
- RF/antenna: RF I/O (antenna/50Ω interface).
- SPI host interface: SDI/MOSI, SDO/MISO, SCK, CS/SS for MCU communication.
- Control/status: RESET, IRQ (interrupt output), SLP/WAKE (sleep control).
- GPIOs: several general-purpose I/O pins usable for LEDs/buttons or peripheral signaling.
- Clock/XTAL: pins for an external 32 MHz crystal or clock input (or internal oscillator selection).
- Misc/test: configuration/strapping and reserved/test pins for factory/debug.
These map to the IEEE 802.15.4 2.4 GHz transceiver functions: RF front end, MAC/PHY controller, SPI host interface, power management and GPIOs. For a full pin-by-pin table see the device datasheet.
Manufacturer
- Manufacturer: Microchip Technology Inc.
- What kind of company: An American multinational semiconductor company that designs, develops, and manufactures microcontrollers, memory, analog and wireless semiconductor products (including 802.15.4 transceivers like MRF24J40).
- What kind of company: An American multinational semiconductor company that designs, develops, and manufactures microcontrollers, memory, analog and wireless semiconductor products (including 802.15.4 transceivers like MRF24J40).
Application
Applications:
- Low-power wireless sensor networks (industrial, commercial, consumer)
- Home/building automation (lighting, HVAC, security, energy management)
- Smart metering and energy monitoring
- Remote monitoring and telemetry
- Wireless MCU I/O links and peripherals
- ZigBee/IEEE 802.15.4 mesh/star networks (MiWi, ZigBee, Thread with appropriate stacks)
- Education and prototyping for IoT projects
- Low-power wireless sensor networks (industrial, commercial, consumer)
- Home/building automation (lighting, HVAC, security, energy management)
- Smart metering and energy monitoring
- Remote monitoring and telemetry
- Wireless MCU I/O links and peripherals
- ZigBee/IEEE 802.15.4 mesh/star networks (MiWi, ZigBee, Thread with appropriate stacks)
- Education and prototyping for IoT projects
Equivalent
Functional equivalents (IEEE 802.15.4, 2.4 GHz) to the Microchip MRF24J40MA include: Atmel/Microchip AT86RF233 / AT86RF230, TI CC2420 / CC2520 (and CC2530 SoC), NXP MC13224V, and Silicon Labs EM358x / EFR32MG series. Note: these are functionally similar; few are pin‑compatible drop‑ins.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25L3233FZBI-08Q
Macronix
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25R3235FZNIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U6435FM2I-10G
Macronix
-
MX25U25645GXDI00
Macronix
-
MX29LV160DTTI-70G
Macronix