画像は参照用のみです。

MPC8313CVRAFFB

Name: MPC8313CVRAFFB
Rating: 4.7 (12 reviews)

IC MPU MPC83XX 333MHZ 516TEPBGA

メーカー
Mfr。パート #MPC8313CVRAFFB
パッケージ
データシート
在庫中5037

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Series	MPC83xx
Part Status	Obsolete
Core Processor	PowerPC e300c3
Number of Cores/Bus Width	1 Core, 32-Bit
Speed	333MHz
RAM Controllers	DDR, DDR2
Graphics Acceleration	No
Ethernet	10/100/1000Mbps (2)
USB	USB 2.0 + PHY (1)
Voltage - I/O	1.8V, 2.5V, 3.3V
Operating Temperature	-40°C ~ 105°C (TA)
Mounting Type	Surface Mount
Package / Case	516-BBGA Exposed Pad
Supplier Device Package	516-TEPBGA (27x27)
Additional Interfaces	DUART, HSSI, I2C, PCI, SPI
Base Product Number	MPC83

概要

Description

The MPC8313CVRAAFFB is an Freescale/NXP evaluation board for the MPC8313 PowerQUICC III communications processor. It provides a prototyping platform for network appliances (routers, switches, gateways, telecom edge devices) based on the MPC8313 SoC. The board exposes multiple high‑speed interfaces (Ethernet MACs/PHYs, PCIe, USB), memory (DDR2/DDR3 SDRAM) and flash, plus standard debug/connectivity (JTAG, serial console), power management, and expansion connectors. It runs embedded software stacks (Linux or VxWorks) and is supported by vendor BSPs and documentation. Typical uses include performance benchmarking, firmware development, and hardware prototyping for network data paths and security/offload tasks. For specifics (CPU core, clocking, port counts, memory size, connectors, power), consult the MPC8313 data sheet and Hardware User Guide for the CVRAAFFB revision on NXP/Freescale’s website, plus BSPs and development tools.

Features

Here are the core features of MPC8313CVRAFFB (Freescale/NXP PowerQUICC III):
- 32-bit PowerPC e500 core, up to about 1 GHz
- External memory interface to DDR2/DDR3 SDRAM with ECC; scalable to multiple GB
- Integrated high-speed interfaces: multiple Ethernet MACs (Gigabit class) with PHY options
- PCI Express 2.0 x1 support for PCIe connectivity
- USB 2.0 host/device (OHCI/UHCI/EHCI) interfaces
- NAND/NOR flash controller plus SD/MMC/SDIO boot/storage options
- Crypto accelerator: AES/DES/3DES, SHA-1/SHA-256, RNG (hardware security engine)
- Rich I/O: UARTs, I2C, SPI, timers, GPIOs, and standard peripherals
- JTAG for on-chip debugging and development
- Boot support from flash or other storage, typical of embedded router/industrial SoCs
Note: exact counts of MACs, memory sizes, and I/O pins vary by package variant; consult datasheet for precise specs.

Package

FBGA (Fine-Pitch Ball Grid Array) package.

Pinout

- Pin count: 1152 pins (Flip-Chip Ball Grid Array, FFBGA)
- Function: Freescale/NXP MPC8313CVRAFFB is a PowerQUICC III (MPC8313) embedded network SoC with a PowerPC e500 core, designed for networking/embedded applications. It integrates multiple Gigabit Ethernet MACs, PCIe, USB, memory interfaces (DDR2/DDR3), and various serial interfaces (UART/SPI/I2C), plus system peripherals.

Manufacturer

Manufacturer: Freescale Semiconductor (now part of NXP Semiconductors).
Kind of company: A semiconductor company that designs and manufactures embedded processors, microcontrollers, networking processors, and other integrated circuits for automotive, communications, and industrial applications.

Application

Applications for MPC8313CVRAFFB include:
- Edge/aggregation networking: routers, switches, VPN gateways, firewalls, load balancers
- Telecom CPE: DSLAMs, media gateways, VoIP gateways
- Industrial networking: industrial Ethernet switches, remote gateways, automation controllers
- Embedded storage/multimedia: NAS/gateways, streaming/media servers
- Wireless infrastructure: small cells and backhaul devices
- General embedded networking/security appliances requiring multicore performance with low power