画像は参照用のみです。

MM74HC74AM

Name: MM74HC74AM
Rating: 4.7 (12 reviews)

D FLIP-FLOP, HC/UH SERIES, 2-FUN

メーカー
Mfr。パート #MM74HC74AM
パッケージ
データシート MM74HC74AM DataSheet
在庫中740

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier	Rochester Electronics, LLC
Package	Bulk
Series	74HC
ProductStatus	Active
Function	Set(Preset) and Reset
Type	D-Type
OutputType	Complementary
NumberofElements	2
NumberofBitsperElement	1
ClockFrequency	94 MHz
MaxPropagationDelay@VMaxCL	19ns @ 6V, 50pF
TriggerType	Positive Edge
Current-OutputHighLow	5.2mA, 5.2mA
Voltage-Supply	2V ~ 6V
Current-Quiescent(Iq)	4 µA
InputCapacitance	5 pF
OperatingTemperature	-40°C ~ 85°C (TA)
MountingType	Surface Mount
SupplierDevicePackage	14-SOIC

概要

Description

The MM74HC74AM is a dual D-type, positive-edge-triggered flip-flop from the 74HC CMOS family. It provides two independent flip-flops (D1→Q1, D2→Q2) with separate clocks (CLK1, CLK2) and asynchronous active-low preset (PR) and clear (CLR) inputs. On the rising edge of each clock, the corresponding Q output takes the value of its D input. If PR is asserted low, the corresponding Q is set high; if CLR is asserted low, Q is cleared low, regardless of D or clock.
Key points:
- Dual 1-bit memory with Q and Q̅ outputs
- Asynchronous PR and CLR for each flip-flop
- Operates from about 2 to 6 V (commonly 5 V)
- Used for synchronous storage, counters, shift registers, toggling, and data transfer
- 14-pin package (AM variant commonly in SOIC/DIP styles)
Check the exact timing specs (setup/hold times, propagation delay) and device pinout in the specific datasheet for your package variant.

Features

Concise features of MM74HC74AM:
- Dual D-type, positive-edge-triggered flip-flops
- Independent inputs: D1 with CP1 and D2 with CP2
- Asynchronous direct inputs: PRE and CLR for each flip-flop (active-low)
- Outputs: Q and Q̅ for each flip-flop
- Edge-triggered on rising clock edge
- CMOS HC family: Vcc = 2 to 6 V (typ. 4.5–5.5 V)
- Low power consumption and fast operation
- 14-pin package (AM variant: typical DIP/SOIC options)
- Suitable for data storage, frequency division, counters, and edge-triggered logic applications

Package

The MM74HC74AM comes in a 14-pin molded Small Outline IC package (SOIC).

Pinout

Pin count: 14 pins (14-pin package, e.g., DIP14/SOIC14).
Function: MM74HC74AM is a dual D-type positive-edge-triggered flip-flop with independent asynchronous preset (PRE) and clear (CLR) inputs. Each flip-flop has a D input, a clock input, a Q and Q̄ output, and asynchronous active-low PRE/CLR. It captures D on the rising clock edge and can be preset or cleared asynchronously.

Manufacturer

- Manufacturer: Monolithic Memories, Inc. (MMI).
- What kind of company: A semiconductor company that designed and manufactured integrated circuits (memory and logic). MMI was acquired by AMD in 1987.

Application

MM74HC74AM is a dual D-type flip-flop with asynchronous preset and clear (active-low) and positive-edge triggering.
Applications:
- Edge-triggered data storage registers
- Shift registers and simple memory elements
- Timing and sequencing in digital circuits
- Frequency division and clocked state machines
- Data synchronization and clock-domain crossing buffers

Equivalent

Equivalents (dual D-type flip-flop with async preset/clear):
- SN74HC74N (TI)
- MC74HC74 (Motorola/Onsemi)
- TC74HC74 (Toshiba)
- 74HCT74N (TTL-compatible)
- SN74LS74N (LS TTL)
These are functionally similar across vendors.