MKL05Z32VLC4

画像は参照用のみです。

MKL05Z32VLC4

IC MCU 32BIT 32KB FLASH 32LQFP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier NXP USA Inc.
Package Tray
Series Kinetis KL0
ProductStatus Active
CoreProcessor ARM® Cortex®-M0+
CoreSize 32-Bit Single-Core
Speed 48MHz
Connectivity I²C, SPI, UART/USART
Peripherals Brown-out Detect/Reset, DMA, LVD, POR, PWM, WDT
NumberofI/O 28
ProgramMemorySize 32KB (32K x 8)
ProgramMemoryType FLASH
RAMSize 4K x 8
Voltage-Supply(Vcc/Vdd) 1.71V ~ 3.6V
DataConverters A/D 14x12b; D/A 1x12b
OscillatorType Internal
OperatingTemperature -40°C ~ 105°C (TA)
MountingType Surface Mount
Package/Case 32-LQFP

概要

Description

MKL05Z32VLC4 is an NXP Freescale microcontroller from the Kinetis L family. It uses an ARM Cortex-M0+ core and is aimed at ultra-low-power, small-footprint embedded apps. It typically runs up to 48 MHz, with a compact memory map (about 32 KB of flash and a few KB of RAM) and a range of peripherals. On‑chip peripherals usually include GPIO, timers, a basic ADC, and serial interfaces such as UART, I2C, and SPI, plus analog comparators. It supports multiple power modes (run, wait/sleep, stop) and operates from a single supply in roughly 1.8–3.6 V. Development is supported with MCUXpresso (and other IDEs) and SWD/JTAG debugging. The VLC4 suffix denotes the package variant for this device. Typical use cases: battery-powered sensors, wearables, and small control systems where low cost, small size, and low power are important. Note: check the specific datasheet for exact RAM, peripheral sets, and voltage ranges for your exact part.

Features

MKL05Z32VLC4 is a Kinetis L Series MCU with a Cortex-M0+ core. Key features:
- Core: ARM Cortex-M0+ up to 48 MHz
- Memory: 32 KB flash, 4 KB RAM
- I/O: up to ~34 GPIOs
- Peripherals: UART/USART, I2C, SPI; 12-bit ADC; 16-bit timers with PWM; analog comparator; CRC; watchdog
- Power: ultra-low power with multiple run/stop/low‑power modes; operating voltage 1.71–3.6 V
- Debug/Programming: on‑chip SWD/JTAG debug
- Package: compact QFN/LQFP options
Note: exact counts may vary by package variant; this summarizes typical capabilities of MKL05Z32VLC4.

Package

32-pin LQFP (plastic Quad Flat Pack) package.

Pinout

- Pin count: 32 pins.
- Function: A 32‑bit ARM Cortex‑M0+ microcontroller from NXP’s Kinetis L family (MKL05Z32), intended for low‑power embedded applications. It includes flash (32 KB), RAM, and typical MCU peripherals (GPIO, UART, I2C, SPI, ADC, Timers, etc.).

Manufacturer

- Manufacturer: NXP Semiconductors.
- What kind of company: A Dutch multinational semiconductor company that designs and manufactures integrated circuits and system solutions (MCUs, processors, analog, sensors) for automotive, industrial, networking, and consumer electronics.

Application

MKL05Z32VLC4 is a low‑power ARM Cortex‑M0+ MCU (32 KB flash) suited for energy‑efficient, cost‑sensitive apps. Common areas:
- IoT edge nodes/gateways
- Wearables and health sensors
- Battery‑powered sensors/data loggers
- Smart home/automation devices
- Automotive body electronics and sensors
- USB‑enabled peripherals and accessories
- Consumer electronics with compact form factor
- Medical devices requiring low power

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似