MIC2095-1YMT-TR

画像は参照用のみです。

MIC2095-1YMT-TR

IC PWR SWITCH P-CHAN 1:1 6TMLF

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchType General Purpose
NumberofOutputs 1
Ratio-Input:Output 1:1
OutputConfiguration High Side
OutputType P-Channel
Interface On/Off
Voltage-Load 2.5V ~ 5.5V
Voltage-Supply(Vcc/Vdd) Not Required
Current-Output(Max) 500mA
RdsOn(Typ) 170mOhm
InputType Non-Inverting
Features Slew Rate Controlled
FaultProtection Current Limiting (Fixed), Over Temperature, UVLO
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
SupplierDevicePackage 6-TMLF® (1.6x1.6)

概要

Description

MIC2095-1YMT-TR is Microchip’s MIC2095 family single-channel high-side load switch. It integrates a high-side FET with built-in protection and current limiting to switch power to a load from a higher supply. Key features typically include overcurrent protection, thermal shutdown, undervoltage lockout, and an enable control. The “-1” indicates one channel; “YMT” is the package code, and “-TR” denotes tape-and-reel packaging. Used for automotive or portable electronics to protect and control loads (LEDs, solenoids, small motors, etc.). For exact specs (voltage/current range, Rds(on), quiescent current), consult the MIC2095 datasheet.

Features

Here are the typical features of the MIC2095-1YMT-TR (per datasheet family):
- High-efficiency step-down (buck) regulator with an integrated switch
- Current-mode control for fast transient response
- External feedback for adjustable output (and variants with fixed outputs)
- Enable/shutdown control
- Soft-start to limit inrush
- Overcurrent/short-circuit protection
- Overtemperature (thermal) shutdown
- Undervoltage lockout
- Wide input range (supports a broad supply range)
- External compensation options via RC network for stable operation
- Built-in protection features such as reverse-current protection
- Package: MIC2095 in the YMT package, tape-and-reel (TR) delivery
Note: for exact output voltage options, input range, switching frequency, and pinout, please refer to the latest datasheet.

Package

8‑pin MSOP package (MSOP-8), Tape & Reel (code YMT).

Pinout

- Pin count: 8 pins (8-pin package; -TR denotes Tape & Reel; YMT is package code)
- Function: MOSFET gate driver for switching regulators (external N-channel MOSFET drive). Provides gate drive output plus typical control pins (input, enable, supply, ground, and feedback/diagnostic pins).

Manufacturer

- Manufacturer: Microchip Technology Inc. (the MIC prefix comes from Micrel, Inc., which Microchip acquired in 2015).
- What kind of company: A global semiconductor company that designs and manufactures analog, mixed-signal, and power-management ICs, as well as microcontrollers, memory, and related solutions.

Application

Typical application areas for MIC2095-1YMT-TR:
- High-efficiency DC–DC buck regulators
- LED backlight and LED driver circuits
- Power management for portable/battery-powered devices
- Automotive and industrial power supplies
- Telecom/network equipment DC-DC front ends
- General high-efficiency power conversion in consumer electronics

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似