MCP4726A3T-E/CH

画像は参照用のみです。

MCP4726A3T-E/CH

IC DAC 12BIT V-OUT SOT23-6

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
NumberofBits 12
NumberofD/AConverters 1
SettlingTime 6µs (Typ)
OutputType Voltage - Buffered
DifferentialOutput No
DataInterface I²C
ReferenceType External, Supply
Voltage-SupplyAnalog 2.7V ~ 5.5V
Voltage-SupplyDigital 2.7V ~ 5.5V
INL/DNL(LSB) ±2, ±0.2
Architecture R-2R
OperatingTemperature -40°C ~ 125°C
Package/Case SOT-23-6
SupplierDevicePackage SOT-23-6

概要

Description

The MCP4726A3T-E/CH is Microchip’s single‑channel, 12‑bit digital‑to‑analog converter (DAC) with I2C interface. It converts a 12‑bit digital code from a microcontroller into a precise analog voltage (0 to VREF or VDD, depending on the reference). Key features include:
- 12‑bit resolution, I2C interface
- Volatile DAC register plus nonvolatile memory to retain the value after power‑up
- Low power with optional programmable power‑down modes
- Buffered output (low source impedance)
- Operating supply typically in the 2.7–5.5 V range
- 7‑bit/3‑bit I2C addressing based on A0–A2 pins
- 8‑pin package; variant and packaging indicated by the A3T‑E/CH suffix (industrial/lead‑free options, etc.)
Common uses: calibration, sensor signal conditioning, reference generation, automated test equipment. For exact electrical specs, timing diagrams, and pinout, consult the MCP4726A3T‑E/CH datasheet.

Features

Key features of MCP4726A3T-E/CH (Microchip):
- Dual 12-bit DAC channels with I2C interface
- Buffered voltage outputs for each channel
- Non-volatile memory to store last output values
- 0 to VDD output range (uses supply as reference)
- Operating supply: typical 2.7–5.5 V
- I2C data rate up to 400 kHz (Fast-mode)
- Small 8-pin package (CH variant)
- Low quiescent current and available power-down modes
- Addressable/configurable I2C address options (via hardware pins)
Note: For exact electrical specs (tolerances, offsets, drift, and temperature range), please consult the official datasheet.

Package

8-pin MSOP package.

Pinout

Pin count: 8 pins.
Function: Dual, 12-bit, I2C-controlled digital-to-analog converter (DAC) with two outputs (VOUTA and VOUTB). Includes I2C interface (SCL, SDA) and address pins (A0, A1) to set the device address, plus power (VDD) and ground (GND).

Manufacturer

- Manufacturer: Microchip Technology Inc. (Microchip).
- What kind of company: A US-based semiconductor company that designs and manufactures microcontrollers, analog ICs, memory, and other embedded control solutions; publicly traded on NASDAQ (MCHP).

Application

Typical applications: I2C-controlled 12-bit DAC to generate precise DC voltages for ADC calibration and offset/gain trim; programmable voltage references; calibration and signal conditioning in test/measurement and instrumentation; analog control signals for microcontroller systems (LED dimming, sensor simulators, motor control); nonvolatile storage of calibration data for power-cycle retention.

Equivalent

Direct equivalents (exact cross-reference) do not exist. MCP4726A3T-E/CH is a 12-bit I2C DAC (1-channel). Closest functional equivalents from other vendors:
- Microchip MCP4725 (12-bit I2C, 1-channel)
- TI DAC7571 (12-bit I2C, 1-channel)
- Analog Devices AD5660/AD5662 family (12-bit I2C, 1–2 channels)
Note: verify voltage range, I2C address, non-volatile memory, and package/pinout before substituting.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似