MCP4019T-103E/LT

画像は参照用のみです。

MCP4019T-103E/LT

IC DGTL POT 10KOHM 128TAP SC70-5

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Taper Linear
Configuration Rheostat
NumberofCircuits 1
NumberofTaps 128
Resistance(Ohms) 10k
Interface I²C
MemoryType Volatile
Voltage-Supply 1.8V ~ 5.5V
Tolerance ±20%
TemperatureCoefficient(Typ) 150ppm/°C
MountingType Surface Mount
SupplierDevicePackage SC-70-5
Package/Case 5-TSSOP, SC-70-5, SOT-353
OperatingTemperature -40°C ~ 125°C

概要

Description

Introduction to MCP4019T-103E/LT:
- What it is: Microchip single-channel I2C digital potentiometer that replaces a mechanical pot for adjustable resistance in analog circuits.
- End-to-end resistance: 10 kΩ (the 103 code). Wiper offers 128 positions (0–127).
- Interface and power: I2C control; operates from ~1.8 to 5.5 V; low power consumption.
- Operation: Wiper value stored in an internal register (voltage divider between terminals A and B); no external DAC is needed.
- Packaging/ordering: 103 indicates 10 kΩ end-to-end; -LT indicates packaging options (lead-free/tape-and-reel as applicable).
- Typical uses: sensor offset trimming, programmable gain/attenuation, signal conditioning and calibration in embedded systems.
Note: Check the datasheet for exact electrical specs, timing, and package details.

Features

MCP4019T-103E/LT features (concise):
- End-to-end resistance: 10 kΩ (103)
- 8-bit wiper: 256 positions
- Interface: I2C-compatible digital potentiometer
- Supply voltage: typical 2.7 V to 5.5 V
- Temperature grade: Extended temp, -40°C to +125°C (E)
- Low power, fast I2C programming
- Small-package options with Tape & Reel (LT)
- RoHS compliant
Note: Wiper value is volatile (retained only while powered). Packaging variations may include SOT-23-6/MSOP-8 options.

Package

8-pin MSOP-8 package; LT indicates lead-free RoHS and Tape‑and‑Reel packaging.

Pinout

- Pin count: 8 pins (8-pin package).
- Function: Single-channel volatile digital potentiometer with 10 kΩ end-to-end resistance (MCP4019T-103E/LT). It provides A–B–W terminals and uses an SPI-compatible control interface (CS, SCK, SI) to set the wiper position (0–255, 256 steps). Power pins are VDD and VSS.

Manufacturer

- Manufacturer: Microchip Technology Inc.
- What kind of company: An American multinational semiconductor company that designs and manufactures microcontrollers, memory, and analog devices (including digital potentiometers like the MCP4019), publicly traded on NASDAQ as MCHP.

Application

- Programmable resistance for adjustable gain/attenuation and feedback in op-amps
- Volume and tone control in audio/video equipment
- Sensor calibration and trimming (offset/gain) for instrumentation and ADC/DAC references
- Programmable voltage dividers and bias/reference networks
- Active filter tuning (set cutoff/Q) in analog signal chains
- Replacement for mechanical potentiometers in compact, rugged designs

Equivalent

Direct cross-refs don’t exist. For the same spec (1‑channel SPI digital pot, end‑to‑end 10 kΩ, volatile, 8‑bit), closest drop‑ins are:
- Microchip MCP41/MCP42 10 kΩ variants
- TI TPL0401/TPL0402
- Analog Devices AD525x (SPI) series
Verify end‑to‑end resistance, number of channels, interface, package and temp range to pick the exact part.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似