MCP2221A-I/SL

画像は参照用のみです。

MCP2221A-I/SL

IC USB TO I2C/UART 14SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Microchip Technology
Package Tube
ProductStatus Active
Protocol USB
Function Bridge, USB to I²C/UART
Interface I²C, UART
Standards USB 2.0
Voltage-Supply 3V ~ 5.5V
Current-Supply 13mA
OperatingTemperature -40°C ~ 85°C
Package/Case 14-SOIC (0.154, 3.90mm Width)

概要

Description

The MCP2221A-I/SL is Microchip’s USB 2.0 Full-Speed USB-to-UART/I2C bridge in an 8-pin package. It lets a PC talk to a microcontroller or peripherals without USB firmware, by providing:
- A single UART channel (PC ↔ MCU) and an I2C master interface for I2C devices.
- A couple of configurable GPIOs for simple control or handshaking.
- A firmware/driver stack that exposes the device as a virtual COM port (or HID) with Microchip’s API, so software on the PC can configure UART speed, I2C operations, and GPIOs.
Key reasons to use it: quick, low-cost USB connectivity for MCU debugging, data logging, or I2C sensor networks; no custom USB firmware required on the MCU side.
Notes: the “I/SL” suffix indicates Industrial temperature range (-40°C to 85°C) and RoHS-compliant (lead-free) packaging. Check the datasheet for exact UART baud rates, I2C speeds, GPIO count, voltage levels, and driver requirements.

Features

Key features of MCP2221A-I/SL:
- USB 2.0 Full-Speed device (12 Mbps) and USB HID-like API
- USB-to-UART/I2C bridge: supports UART (TX/RX) and I2C Master interfaces
- I2C Master operation up to 400 kHz
- Four configurable GPIO pins (dir, state, basic I/O for user signaling)
- Easy software support: MCP2221 Utility, HID APIs, Windows/Linux/macOS drivers
- Industrial temperature range: -40°C to +85°C (I variant)
- RoHS-compliant, SL packaging (lead-free, small-outline package)
- Low-power operation with USB suspend/wake capability
- Simple, no-host-driver-needed basic operation; drivers available for full functionality

Package

MCP2221A-I/SL comes in an 8-pin Small Outline Package (SOIC-8). It is RoHS-compliant/lead-free with industrial temperature range (-40°C to 85°C).

Pinout

- Pin count: 16 pins (MCP2221A-I/SL in a SOIC-16 package).
- Function: USB 2.0 Full-Speed to UART/I2C bridge with four general-purpose I/O pins (GP0–GP3). It provides a USB interface to a host and can operate as a UART bridge (Tx/Rx) with optional I2C master mode on two of the GPIOs.

Manufacturer

- Manufacturer: Microchip Technology Inc.
- What kind of company: An American multinational semiconductor company that designs and manufactures embedded-control products, including microcontrollers, analog/mixed-signal ICs, memory, and interfaces (e.g., USB-to-UART).

Application

- USB-to-UART bridge for MCU/embedded system development, debugging, and serial consoles
- USB-to-I2C master interface for I2C sensors, EEPROMs, displays, etc.
- USB-to-SPI master interface for SPI devices
- GPIO for bit-banging control and peripheral interfacing
- PC-based programming, data acquisition, testing, and lab instrumentation
- Industrial-grade version suitable for automation and instrumentation in harsh (industrial) environments

Equivalent

Equivalent products (USB-to-UART with GPIO/I2C options):
- FTDI FT232R / FT231X / FT232H
- Silicon Labs CP2102N / CP2104
- Prolific PL2303HX / PL2303
- WCH CH340 / CH341U
Note: exact pinout, GPIO/I2C/SPI capabilities vary; check datasheets for feature parity.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似