MC74HCT541ADWG

画像は参照用のみです。

MC74HCT541ADWG

IC BUF NON-INVERT 5.5V 20SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier onsemi
Package Tube
Series 74HCT
ProductStatus Active
LogicType Buffer, Non-Inverting
NumberofElements 1
NumberofBitsperElement 8
OutputType 3-State
Current-OutputHighLow 6mA, 6mA
Voltage-Supply 4.5V ~ 5.5V
OperatingTemperature -55°C ~ 125°C (TA)
MountingType Surface Mount
Package/Case 20-SOIC (0.295, 7.50mm Width)

概要

Description

MC74HCT541ADWG is an octal buffer/driver with 3-state outputs in the 74HCT family. It provides eight non-inverting data paths (A0–A7 to Y0–Y7) with a common output-enable input (G). When the output enable is active, the outputs follow the inputs; when not, all outputs go high impedance, enabling bus sharing. The device is TTL-compatible, uses high-speed CMOS, and typically runs from a 4.5–5.5 V supply. Common uses include buffering a data bus between a microprocessor/logic and memory or peripherals, increasing drive capability and fan-out, and isolating buses in multi-device systems. The ADWG suffix denotes the package/RoHS-compliant form (check the datasheet for the exact package type and temperature rating). For precise electrical specs—propagation delay, drive strength, leakage, and pinout—refer to the MC74HCT541ADWG datasheet from TI/ON Semiconductor.

Features

Here are the key features of MC74HCT541ADWG:
- Octal buffer/line driver with 3-state outputs (8 buffers)
- Non-inverting data path: A0–A7 to Y0–Y7
- One enable input (G) that is typically active LOW to tristate all outputs
- HCT technology: TTL-compatible input thresholds
- Single-supply operation: Vcc = 4.5–5.5 V
- High fan-out capability and standard CMOS timing
- Packages/grade indicated by ADWG variant; suitable for surface-mount or standard PCB use
- ESD protection and wide operating temperature for typical digital systems
(Provides a fast, eight-bit buffer with controlled tri-state outputs for interfacing TTL with CMOS logic.)

Package

20-pin wide SOIC package (gull-wing leads), RoHS-compliant.

Pinout

- Pin count: 20 pins (20-pin package)
- Function: Octal buffer/line driver with 3-state outputs (non-inverting). It buffers eight data inputs (A0–A7) to eight outputs (Y0–Y7) and uses an enable input (G) to place the outputs in high-impedance state when disabled.

Manufacturer

Manufacturer: ON Semiconductor (ON Semiconductor Corporation).
Company type: An American multinational semiconductor company that designs and manufactures integrated circuits and other semiconductor devices.

Application

- 8-bit buffer/driver with tri-state outputs for bus driving
- Buffers data/address lines between microprocessors, memory and peripherals
- Provides bus isolation and enables multi-device sharing on a common bus
- I/O expansion and level-matching between TTL/CMOS devices and buses
- Drives moderate-capacitance loads in high-speed digital systems

Equivalent

Equivalent devices (octal buffer/driver with 3-state, noninverting):
- SN74HCT541 (Texas Instruments)
- 74HCT541 (Nexperia/NXP)
- 74HCT541 (STMicroelectronics)
- NC74HCT541 (On Semiconductor)
Any 74HCT541 variant in the same package is a drop-in substitute.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照(DHL/FedEx):

DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100%前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送