MC33926AES

画像は参照用のみです。

MC33926AES

H-BRIDGE, BRUSHED DC MOTOR DRIVE

  • メーカー
  • Mfr。パート #MC33926AES
  • パッケージ WFDFN-10
  • データシート
  • 在庫中2691

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tray
ProductStatus Active
MotorType-Stepper Bipolar
MotorType-ACDC Brushed DC
Function Driver - Fully Integrated, Control and Power Stage
OutputConfiguration Half Bridge (2)
Interface Parallel
Technology CMOS
Applications Automotive, DC Motors
Current-Output 5A
Voltage-Supply 5V ~ 28V
Voltage-Load 5V ~ 28V
OperatingTemperature -40°C ~ 125°C (TA)
MountingType Surface Mount, Wettable Flank
Package/Case 10-WFDFN Exposed Pad

概要

Description

MC33926AES is a dual high-current motor-driver IC from NXP (Freescale). It provides two independent H-bridges to drive DC motors from a 5–28 V supply. Each bridge is controlled by logic inputs (IN1/IN2 and IN3/IN4) or PWM for speed and direction, and it includes current-sense outputs for feedback. Protections include undervoltage lockout, overcurrent/short-circuit protection, and overtemperature shutdown, plus deadtime to prevent shoot-through. It’s suited for robotics, hobbyist motor controllers, and small automotive/industrial motors. The AES suffix indicates a specific package/variant; check the datasheet for exact pinout, per-channel current ratings, power dissipation, and thermal data.

Features

Here are the key features of the MC33926AES:
- Dual high-current half-bridge motor driver (two H-bridges) for DC motors.
- Wide operation: 5–28 V nominal motor supply (handles automotive transients).
- Integrated low Rds(on) MOSFETs for high efficiency.
- PWM-compatible inputs to control direction, braking, and speed for each bridge.
- Current monitoring and protection: overcurrent/short-circuit protection with current-limiting; IS pin for motor current feedback.
- Fault protection and diagnostics: UVLO, overtemperature, overcurrent, short-to-GND/short-to-Vcc protections; DIAG/diagnostic output (open-drain) for fault reporting.
- Brake and enable features: dedicated brake function and enable control per bridge.
- Automotive-grade/ AES variant with extended temperature range and robust protection suitable for automotive environments.
- Compact single-package solution reduces BOM and board space.

Package

MC33926AES comes in a 28-pin HTSSOP (Power-SSOP) package with an exposed pad; this is the automotive-grade variant.

Pinout

- Pin count: 28 pins (packages include 28‑pin SOIC/LQFP/DIP).
- Function: Dual high‑current H‑bridge motor driver with current sensing and protection.
- Provides two full bridges (four motor outputs): OUT1/OUT2 (Bridge A) and OUT3/OUT4 (Bridge B).
- Power: VBAT (motor supply) and GND.
- Control: IN1/IN2 for Bridge A, IN3/IN4 for Bridge B (plus enable/drive control as applicable).
- Sensing/limit: IS1/IS2 current-sense outputs with VREF to set current limit.
- Diagnostic: FAULT/DIAG status output.
- Protection: undervoltage, overcurrent, thermal shutdown.

In short: MC33926AES is a 28‑pin dual motor H‑bridge driver with built‑in protection, current sensing, and diagnostic feedback suitable for driving two DC motors from a single device.

Manufacturer

Manufacturer: NXP Semiconductors (the MC33926AES is the automotive version of the MC33926; originally from Freescale Semiconductor, now part of NXP).
What kind of company: NXP is a Dutch multinational semiconductor company that designs and manufactures integrated circuits and electronics for automotive, industrial, and consumer applications.

Application

- Voltage range: 5–28 V
- Automotive DC motor drives (power windows/seats/door locks/HVAC actuators)
- Robotics (DC motor driving for hobby/education robots)
- Industrial automation (actuators, conveyors, pumps, fans)
- General embedded/prototyping projects needing rugged high-current motor drive

Equivalent

Equivalent products (dual high-side/low-side brushed DC motor drivers) include:
- TI DRV8412
- TI DRV8833
- ST L6201/L6202/L6205
- ST L298N
- Allegro A4950/A4954
- Onsemi MC33887/MC33886
Note: choose by voltage/current rating, package, and protection features to match MC33926AES.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似