MC33662BLEFR2

画像は参照用のみです。

MC33662BLEFR2

IC TRANSCEIVER 1/1 8SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier NXP USA Inc.
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
Type Transceiver
Protocol LINbus
NumberofDrivers/Receivers 1/1
DataRate 20kbps
Voltage-Supply 7V ~ 18V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

概要

Description

MC33662BLEFR2 is an NXP/Freescale Bluetooth Low Energy (BLE) transceiver IC. It provides a 2.4 GHz BLE radio front-end and baseband that can work with an external host MCU over a serial interface (SPI/I2C) to run a BLE stack. The FR2 suffix indicates a specific package variant. It targets low-power, short-range wireless for automotive and consumer devices (wearables, sensors, remotes, gateways). You integrate the IC with a host MCU, supply rails per the datasheet, and implement BLE (GAP/GATT) via software or an accompanying stack. For exact electrical specs—voltage ranges, TX/RX current, sensitivity, data rate, timing, pinout, register map, power modes, and regulatory compliance—refer to the official MC33662BLEFR2 datasheet and reference designs from NXP/Freescale. Availability may vary since it’s an older-generation part.

Package

MC33662BLEFR2 comes in an 8‑pin SOIC (surface-mount) package. It’s RoHS compliant, with Tape & Reel packaging (the FR2 code).

Pinout

Pin count: 8 pins.
Function: High‑speed CAN transceiver. It interfaces a CAN controller to the CAN bus, providing CANH/CANL on the bus side and TXD/RXD on the controller side, along with power (Vcc/GND) and standby/enable control.

Manufacturer

Manufacturer: NXP Semiconductors (the Freescale Semiconductor lineage; NXP acquired Freescale in 2015).
What kind of company: A Dutch multinational semiconductor company that designs and manufactures microchips and embedded processing solutions for automotive, industrial, and consumer applications.

Application

Possible application areas for MC33662BLEFR2 (BLE front-end module):
- Wearables and fitness sensors
- Wireless medical devices
- Smart home/building automation and BLE beacons
- Industrial IoT sensors and asset tracking
- Automotive applications (telematics, key fobs, sensor networks)
- Consumer electronics (remote controls, peripherals)
- Smart lighting and proximity sensing
(Note: Use cases depend on integration with host MCU and RF design.)

Equivalent

Equivalent parts (CAN transceivers) from major vendors include:
- NXP: TJA1040 / TJA1042 (and TJA1041)
- TI: SN65HVD230 / SN65HVD231 / SN65HVD232
- Microchip: MCP2551 / MCP2554
These offer similar CAN interface functionality (high-speed CAN, 5V logic, standby/wake features). Note: pinouts and electrical specs differ; always cross-check datasheets and package options for exact form factor (BLEFR2).

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似