MAX4932ETD+T

画像は参照用のみです。

MAX4932ETD+T

IC MULTIPLEXER DUAL 3X1 14TDFN

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Analog Devices Inc./Maxim Integrated
Package Strip
ProductStatus Active
MountingType Surface Mount

概要

Description

MAX4932ETD+T is a Maxim Integrated device in the MAX4932 family, provided in an ETD package with Tape & Reel. It is an analog switch/multiplexer device used to route analog signals under digital control.
Key points:
- Purpose: switch or multiplex analog signals with low leakage and controlled timing.
- Typical characteristics (family-wide): single-supply operation, low on-resistance, fast switching, and limited charge injection; suitable for signal routing in instrumentation, data acquisition, audio/video paths, and portable electronics.
- Packaging: ETD variant, with +T indicating Tape & Reel (the exact packaging details and temperature rating vary by part revision).
For exact specs (Vcc range, RON, switch time, control logic, isolation, ESD, and pinout), consult the MAX4932 datasheet or product page. If you share the specific application or required features, I can summarize the exact parameters you’ll care about.

Features

Here are the typical features of the MAX4932ETD+T (RS-485/RS-422 transceiver family; exact limits may vary by submodel):
- Dual-wire RS-485/RS-422 transceiver, suitable for half‑duplex networks
- 3 V to 5.5 V supply operation (low‑power design)
- Driver enable (DE) and receiver enable (~RE) controls
- Fail‑safe receiver output (logic HIGH when inputs are open, shorted, or idle)
- Bus pins A and B with protection and wide common‑mode range (-7 V to +12 V)
- 1/2 unit load on the bus (typical; may vary by variant)
- Low quiescent current in both transmit and receive modes
- ESD protection on bus pins; robust to common fault conditions
- Tape & Reel packaging (ETD+T) in an 8‑pin package
Note: exact data rates, current specs, and temperature range can vary by exact submodel. Refer to the official datasheet for the precise numbers.

Package

MAX4932ETD+T uses an 8‑pin TSSOP package; “+T” indicates Tape & Reel packaging.

Pinout

Pin count: 8 pins (8-pin package).
Function: Single-channel RS-485/RS-422 transceiver (half‑duplex). Pins include A and B (differential bus), DI (driver input), RO (receiver output), DE (driver enable), RE (receiver enable, active low), Vcc, and GND.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A multinational fabless semiconductor company that designs, develops, and sells analog and mixed-signal integrated circuits.

Application

Typical applications for MAX4932ETD+T: analog signal routing and multiplexing in data acquisition and instrumentation; front-end switching for audio/video paths; sensor-array signal conditioning; portable/battery-powered electronics requiring low leakage and fast switching; test and measurement equipment; automotive and industrial interfaces needing reliable, low on-resistance signal paths.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似