MAX487EEPA+

画像は参照用のみです。

MAX487EEPA+

IC TRANSCEIVER HALF 1/1 8DIP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Analog Devices Inc./Maxim Integrated
Package Tube
ProductStatus Active
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 70 mV
DataRate 250kbps
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 85°C
MountingType Through Hole
Package/Case 8-DIP (0.300, 7.62mm)

概要

Description

Introduction to MAX487EEPA+ (concise)
- What it is: Maxim’s MAX487EEPA+ is a single-supply RS-485/RS-422 transceiver (half-duplex) in an 8-pin package, combining a differential driver and receiver for two-wire networks.
- Key features: typically powered from 4.75–5.25 V, with a failsafe/reliable receiver output when the bus is idle or faulted; enables for both the driver and receiver enable control; designed for robust operation in industrial environments.
- Variant notes: the “EPA” indicates the package type (8-pin) and “+” denotes an enhanced/extended version, often with an extended temperature range suitable for harsher conditions.
- Applications: industrial automation, motor controls, process control, building automation, and other RS-485/RS-422 networked systems.
- What to check: for exact data rates, input thresholds, bus strengths, power consumption, and pinout, consult the MAX487EEPA+ datasheet.
If you need, I can pull the specific electrical specs or compare it with similar transceivers.

Features

Here are concise features of MAX487EEPA+ (RS-485/RS-422 transceiver):
- Half-duplex RS-485/RS-422 transceiver
- 5V single-supply operation (typical 4.75V–5.25V)
- Data rates up to several Mbps (MAX487 family level)
- Fail-safe receiver: output goes high with open, shorted, or idle inputs
- Separate driver enable (DE) and receiver enable (RE) controls
- Robust protection: ESD protection on bus pins and bus-fault protection
- Wide bus/common-mode input range
- Low power consumption for dense networks
- 8-pin EPA+ package; RoHS-compliant; suitable for industrial temperature ranges (typical -40°C to +85°C)
Note: For exact figures (max data rate, bus protection specs, and temperature range), please refer to the MAX487EEPA+ datasheet.

Package

MAX487EEPA+ uses an 8-pin SOIC package with an exposed pad (SOIC-8 with EP).

Pinout

Pin count: 8 pins.
Function: An 8-pin RS-485/RS-422 transceiver. It provides a driver (DI to differential A/B) and a receiver (A/B to RO) with separate enables (DE for the driver, /RE for the receiver). Pins include A, B (bus lines), DI, RO, DE, /RE, Vcc, and GND.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A US-based multinational semiconductor company that designs and manufactures analog and mixed-signal integrated circuits (now under Analog Devices).

Application

- Industrial automation and process control (RS-485/RS-422 bus)
- Building automation and HVAC systems
- Data acquisition and instrumentation networks
- Remote monitoring, telemetry, and smart-metering
- PLC/motor-control networks and other multi-point RS-485/RS-422 applications

Equivalent

MAX487EEPA+ is a 5V RS-485/RS-422 transceiver. Common equivalents from other vendors include:
- TI SN65HVD178 / SN65HVD178A
- ST SP485 / SP487
Note: exact cross-reference depends on package, unit load, data rate, and fail-safe options. Check distributor/manufacturer cross-reference tables for an exact match.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似