MAX3222ECAP

画像は参照用のみです。

MAX3222ECAP

IC TRANSCEIVER FULL 2/2 20SSOP

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Analog Devices Inc./Maxim Integrated
Package Tube
ProductStatus Obsolete
Type Transceiver
Protocol RS232
NumberofDrivers/Receivers 2/2
Duplex Full
ReceiverHysteresis 500 mV
DataRate 1Mbps
Voltage-Supply 3V ~ 5.5V
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 20-SSOP (0.209, 5.30mm Width)

概要

Description

MAX3222ECAP is a dual RS-232 transceiver from Maxim. It provides two drivers and two receivers to connect a microcontroller’s UART to RS-232 devices.
Key points
- Function: Converts TTL/CMOS UART signals to RS-232 levels and RS-232 inputs back to TTL/CMOS.
- Supply and operation: Single-supply device (typically 3.0–5.5 V) using a charge-pump to generate RS-232 voltages.
- ECAP note: The ECAP suffix indicates external charge-pump capacitors are required (C1+, C1−, C2+, C2−, plus V+ and V− connections per datasheet).
- Pinout (typical): T1IN, T2IN (TTL/CMOS inputs); T1OUT, T2OUT (RS-232 outputs); R1IN, R2IN (RS-232 inputs); R1OUT, R2OUT (TTL/CMOS outputs); V+, V− (pump outputs); VCC and GND.
- Applications: MCU-to-PC serial ports, embedded UART interfaces, debugging consoles.
In short, MAX3222ECAP is a robust, dual-channel bridge between a microcontroller and RS-232 devices, requiring external pump capacitors.

Features

Here are the typical features of MAX3222ECAP (RS‑232 transceiver with ECAP package):
- 2 drivers and 2 receivers for RS-232 communication
- Single-supply operation: 3.0 V to 5.5 V
- Internal charge-pump with external capacitors (typical 0.1 µF) to generate RS-232 levels
- ECAP package (exposed pad) for improved thermal dissipation
- TTL/CMOS-compatible logic thresholds on inputs and RS-232-compatible outputs
- Low quiescent current and suitable for low-power applications
- Wide operating temperature range (common variant: -40°C to +85°C)
- ESD protection on RS-232 lines and control pins
- Input/output voltage ranges suitable for RS-232 signaling and standard interfaces
Note: Check the exact datasheet for cap values, temperature range, and package details for the specific lot.

Package

An 8-pin SOIC package with an exposed pad (EP) for thermal relief.

Pinout

- Pin count: 16 pins (DIP-16/SO-16/TSSOP-16 variants; ECAP packaging variant also 16 pins).
- Function: Dual RS-232 transceiver (two drivers and two receivers) that converts TTL/CMOS logic levels to RS-232 levels and RS-232 levels to TTL/CMOS. Requires external charge-pump capacitors (C1+/C1−, C2+/C2−, plus V+ and V−).

Manufacturer

Manufacturer: Maxim Integrated Products (now part of Analog Devices).
What kind of company: A fabless semiconductor company that designs and sells analog and mixed-signal integrated circuits (now under Analog Devices).

Application

Dual RS-232 transceiver for UART-to-RS-232 interfaces. Common applications:
- Microcontroller/embedded systems needing RS-232 ports
- PCs/terminals and modems
- Industrial automation and instrumentation
- Data acquisition and test equipment
- Point-of-sale terminals and kiosks
- Networking equipment console ports
- Medical/lab devices and portable, low-power RS-232 applications

Equivalent

Equivalent RS-232 transceivers (2 Rx/2 Tx, charge-pump, 3–5.5V):
- MAX232 / MAX232A / MAX3232 (Maxim)
- ST232 / ST3232 (STMicroelectronics)
- ADM232 / ADM3232 (Analog Devices)
- SP3232 / SP3232E (Exar/Renesas)

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似