M95640-RMC6TG

画像は参照用のみです。

M95640-RMC6TG

IC EEPROM 64KBIT SPI 8UFDFPN

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Part Status Active
DigiKey Programmable Not Verified
Memory Type Non-Volatile
Memory Format EEPROM
Technology EEPROM
Memory Size 64Kbit
Memory Organization 8K x 8
Memory Interface SPI
Write Cycle Time - Word, Page 5ms
Voltage - Supply 1.8V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 8-UFDFN Exposed Pad
Supplier Device Package 8-UFDFPN (2x3)
Base Product Number M95640
Clock Frequency 20 MHz

概要

Description

The M95640-RMC6TG is a 64-kbit serial EEPROM (Electrically Erasable Programmable Read-Only Memory) from STMicroelectronics. It uses the SPI (Serial Peripheral Interface) protocol for communication, allowing for high-speed data transfer and flexibility in interfacing with microcontrollers and other devices. The EEPROM is organized as 8 pages of 256 bits each, enabling efficient data storage and retrieval.
Key features include a wide operating voltage range (1.8V to 5.5V), fast access times, and the ability to perform multiple write and erase cycles, making it suitable for applications that require non-volatile memory, such as configuration settings, firmware storage, and data logging. The device also incorporates features like write protection and a hardware reset, enhancing reliability and security in embedded systems. Its compact form factor and low power consumption make it an ideal choice for various consumer electronics and industrial applications.

Features

The M95640-RMC6TG is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) from STMicroelectronics. Key features include:
1. Memory Density: 64 Kbit (8 KB) storage capacity.
2. Interface: SPI (Serial Peripheral Interface) for fast data transfer.
3. Voltage Range: Operates at a supply voltage of 2.5V to 5.5V, making it versatile for various applications.
4. Speed: Supports up to 10 MHz clock frequency for quick read/write operations.
5. Endurance: High endurance of up to 1 million write/erase cycles.
6. Data Retention: Retains data for up to 40 years under recommended operating conditions.
7. Package: Available in a compact 8-pin SOIC (Small Outline Integrated Circuit) package, accommodating space-constrained designs.
8. Features: Supports multiple addressing modes and has built-in write protection and status register for enhanced data integrity.
This makes the M95640-RMC6TG suitable for applications in consumer electronics, automotive systems, and industrial automation.

Package

The M95640-RMC6TG is packaged in an 8-pin SOIC (Small Outline Integrated Circuit) format. This package type is designed for surface mount applications, offering a compact size suitable for various electronic devices.

Pinout

The M95640-RMC6TG is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) device with a total of 8 pins. The pin configuration and functions are as follows:
1. VCC: Power supply pin.
2. GND: Ground pin.
3. SCL: Serial Clock input for clocking data in and out.
4. SDA: Serial Data line for data input/output and communication.
5. WP: Write Protect pin, used to enable or disable write operations.
6. HOLD: Hold pin, used to pause the serial communication.
7. A0: Address pin for selecting one of multiple devices on the same bus (optional, based on specific configurations).
8. A1: Another address pin (optional, for additional device selection).
The M95640 operates via I2C (Inter-Integrated Circuit) protocol, allowing for efficient communication in embedded applications. It typically features a memory size of 64 Kbit.

Manufacturer

The M95640-RMC6TG is manufactured by STMicroelectronics, a global semiconductor company. STMicroelectronics specializes in various sectors, including automotive, industrial, personal electronics, and communication equipment. They design and produce a wide range of integrated circuits, microcontrollers, and sensors. The company focuses on providing innovative solutions that enhance performance, efficiency, and connectivity in electronic devices. With a strong commitment to research and development, STMicroelectronics plays a significant role in advancing technology across multiple industries.

Application

The M95640-RMC6TG is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) used in various applications including consumer electronics, automotive systems, industrial automation, and telecommunications. It is suitable for storing configuration data, calibration parameters, firmware updates, and user preferences due to its non-volatile memory characteristics and I²C interface, which allows for easy integration into microcontroller-based designs.

Equivalent

The M95640-RMC6TG is a 64Kb Serial EEPROM. Equivalent products include the AT25DF041A from Microchip, 25LC040A from Microchip, and the 93C46 from Microchip. Other alternatives may include the CAT24C64 from ON Semiconductor and the 24C64 from Microchip. Always check the specific electrical characteristics and package compatibility when considering replacements.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似