LTC1485IS8

画像は参照用のみです。

LTC1485IS8

IC TRANSCEIVER HALF 1/1 8SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active
Type Transceiver
Protocol RS422, RS485
NumberofDrivers/Receivers 1/1
Duplex Half
ReceiverHysteresis 60 mV
Voltage-Supply 4.75V ~ 5.25V
OperatingTemperature -40°C ~ 85°C
MountingType Surface Mount
Package/Case 8-SOIC (0.154, 3.90mm Width)

概要

Description

The LTC1485IS8 is an 8-pin high-side hot-swap controller from Linear Technology (Analog Devices). It protects a power rail during plug-in by driving an external N‑channel MOSFET and limiting inrush current.
Key points:
- Provides current-limit protection via a sense resistor to protect against shorts and overloads.
- Soft-start to control inrush when a board powers up.
- Overvoltage/undervoltage protection and thermal shutdown to guard the rail.
- Fault/flag output for remote indication; can be used for latch or auto-retry behavior depending on configuration.
- Uses an external MOSFET and sense resistor; the IS8 suffix indicates the 8-pin package.
Typical uses: hot-plug or hot-swap protection for boards in servers, telecom equipment, or any live power rail where controlled power-up and fault indication are needed.
For exact electrical specs, pinout, and application recommendations, see the LTC1485IS8 datasheet.

Package

The LTC1485IS8 is in an 8-pin plastic Small Outline package (SO-8), i.e., an 8‑lead SOIC package.

Pinout

Pin count: 8 pins (IS8 package).
Function: High-side hot-swap controller with current limit for protecting a supply rail; drives an external MOSFET and provides fault/status signaling with inrush/current protection.

Manufacturer

Manufacturer: Analog Devices, Inc. (ADI). It is a multinational semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits (originally Linear Technology, acquired by ADI in 2017).

Application

Applications areas for LTC1485IS8:
- Hot-swap controllers and overvoltage protection for DC power rails
- High-side/low-side MOSFET gate drive for DC-DC converters
- Power-path protection in automotive and industrial systems
- Load switching and sequencing in distributed power architectures
- Fault protection and current-limit implementations in battery packs and power supplies

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似