画像は参照用のみです。
LTC1148LCS-3.3
IC REG CTRLR BUCK 14SOIC
- メーカー
- Mfr。パート #LTC1148LCS-3.3
- パッケージ
- データシート
- 在庫中18401
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Part Status | Obsolete |
| Base Product Number | LTC1148 |
| Output Type | Transistor Driver |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Number of Outputs | 1 |
| Output Phases | 1 |
| Voltage - Supply (Vcc/Vdd) | 3.5V ~ 20V |
| Frequency - Switching | Up to 250kHz |
| Duty Cycle (Max) | 100% |
| Synchronous Rectifier | Yes |
| Clock Sync | No |
| Control Features | Current Limit, Enable |
| Operating Temperature | 0°C ~ 70°C (TA) |
| Mounting Type | Surface Mount |
| Package | 14-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 14-SO |
| Packaging | Tube |
概要
Description
The LTC1148LCS-3.3 is a 3.3V-logic version of Linear Technology’s LTC1148 family. It’s a high-performance DC power switch controller intended to gate external MOSFETs to form a low-loss power-distribution switch. The LCS suffix indicates the package type for this variant.
Key points:
- 3.3V logic-domain operation with protection features
- Current limiting, overcurrent protection, undervoltage lockout, and thermal shutdown
- Fault reporting/output status to simplify system monitoring
- Suitable for power rails in embedded systems, CPU/SoC power gating, LED drivers, and other load-switching applications
How it’s used:
- Connect input supply to VIN, place external MOSFETs as switches, and drive control/feedback pins with logic signals
- Use protection and status outputs to ensure robust operation
For exact pins, electrical specs, timing, and application notes, consult the official LTC1148LCS-3.3 datasheet. If you share a link or specific requirements, I can summarize the key figures.
Key points:
- 3.3V logic-domain operation with protection features
- Current limiting, overcurrent protection, undervoltage lockout, and thermal shutdown
- Fault reporting/output status to simplify system monitoring
- Suitable for power rails in embedded systems, CPU/SoC power gating, LED drivers, and other load-switching applications
How it’s used:
- Connect input supply to VIN, place external MOSFETs as switches, and drive control/feedback pins with logic signals
- Use protection and status outputs to ensure robust operation
For exact pins, electrical specs, timing, and application notes, consult the official LTC1148LCS-3.3 datasheet. If you share a link or specific requirements, I can summarize the key figures.
Package
LTC1148LCS-3.3 uses an LCS package: Leadless Chip Scale Package, 8‑lead, with a small 3×3 mm body footprint.
Pinout
- Pin count: 8 pins (LCS package).
- Function: 3.3V microprocessor supervisor/reset IC; monitors the 3.3V rail and provides a reset output (with optional manual reset) when the supply is out of tolerance.
- Function: 3.3V microprocessor supervisor/reset IC; monitors the 3.3V rail and provides a reset output (with optional manual reset) when the supply is out of tolerance.
Manufacturer
Manufacturer: Linear Technology Corporation (LTC). It is a semiconductor company specializing in analog and mixed-signal integrated circuits. Linear Technology was acquired by Analog Devices in 2017, so LTC parts are now offered under Analog Devices.
Application
Fixed 3.3V step-down switching regulator used to generate 3.3V rails from higher inputs in compact power supplies. Typical applications: microprocessor/FPGA/ASIC and memory rails; DSPs; telecom/networking equipment; consumer electronics; automotive and industrial controllers; battery-powered/portable devices requiring high efficiency.
Equivalent
LTC1148LCS-3.3 is a hot-swap/current-limit controller. There isn’t a direct 1:1 cross‑reference published, but close equivalents include:
- Texas Instruments: TPS2460/TPS2462/TPS2463 (and TPS2440/TPS2442)
- On Semiconductor: NCP3063/NCP3064
Note: pinouts and exact specs differ; verify voltage range, current limit, enable, and packaging before replacing.
- Texas Instruments: TPS2460/TPS2462/TPS2463 (and TPS2440/TPS2442)
- On Semiconductor: NCP3063/NCP3064
Note: pinouts and exact specs differ; verify voltage range, current limit, enable, and packaging before replacing.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25V1635FZNQ03
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L12835FZ2I-10..
Macronix
-
MX29LV640ETTI-70G
Macronix
-
MX25L25735FMI-10G
Macronix