LT1976IFE

画像は参照用のみです。

LT1976IFE

IC REG BUCK ADJ 1.5A 16TSSOP

  • メーカー
  • Mfr。パート #LT1976IFE
  • パッケージ
  • データシート
  • 在庫中7848

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Part Status Discontinued at DigiKey
Base Product Number LT1976
Function Step-Down
Output Configuration Positive
Topology Buck
Output Type Adjustable
Number of Outputs 1
Voltage - Input (Min) 3.3V
Voltage - Input (Max) 60V
Voltage - Output (Min/Fixed) 1.25V
Voltage - Output (Max) 55.2V
Current - Output 1.5A (Switch)
Frequency - Switching 200kHz
Synchronous Rectifier No
Mounting Type Surface Mount
Package 16-TSSOP (0.173", 4.40mm Width) Exposed Pad
Supplier Device Package 16-TSSOP-EP
Packaging Tube

概要

Description

Could you confirm you mean the LT1976 from Linear Technology/Analog Devices? “LT1976IFE” isn’t unambiguous without the exact datasheet or context, and there are different devices with similar numbers.
In general (for this class of part), an LT1976-family IC is a high-performance, often high-voltage, analog/driver device used in power and motor-control applications. Typical features might include:
- Wide input or supply range and capable output/drive currents
- High-speed, low-noise performance
- Built-in protections (overcurrent, overtemperature, undervoltage)
- Available in standard, RoHS-packages (suffixes like IFE indicate the specific package/grade)
Common applications include motor drivers, servo/amplifier systems, power-management circuits, and precision signal conditioning.
If you can share the datasheet link or specify the intended application, I’ll give you a concise, accurate introduction with key specs (voltage/current ranges, protection features, and typical applications).

Package

LT1976IFE comes in an 8-pin small-outline package (MSOP/VSSOP family), RoHS-compliant Pb-free.

Pinout

- Pin count: 8 pins (MSOP-8/SO-8 package).
- Function: LT1976IFE is a high-side current-regulation/monitor IC. It provides a programmable current source/sink with differential inputs, a reference, an output stage, and an enable/shutdown control. It is intended for precision current regulation (e.g., LED drivers or sense-regulated loads) using a sense resistor. Typical pins include V+, GND, OUT, IS/SET, IN+, IN−, REF, EN.

Manufacturer

The LT1976IFE is manufactured by Analog Devices, Inc. (ADI). Analog Devices is a global semiconductor company that specializes in analog, mixed-signal, and DSP integrated circuits. It originated as Linear Technology, which was acquired by ADI in 2017.

Application

LT1976IFE is a precision signal-conditioning op-amp. Common applications include:
- Transimpedance amplifiers for photodiodes
- Current-sense/shunt amplifier front-ends
- Differential-to-single-ended sensor interfaces
- Active filters and equalizers
- ADC driver stages
- Audio/instrumentation signal conditioning

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似