画像は参照用のみです。
LP3985IM5-2.8
IC REG LINEAR 2.8V 150MA SOT23-5
- メーカー
- Mfr。パート #LP3985IM5-2.8
- パッケージ SOT-23-5
- データシート
- 在庫中7629
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tape & Reel (TR) |
| ProductStatus | Obsolete |
| OutputConfiguration | Positive |
| OutputType | Fixed |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 6V |
| Voltage-Output(Min/Fixed) | 2.8V |
| VoltageDropout(Max) | 0.1V @ 150mA |
| Current-Output | 150mA |
| Current-Quiescent(Iq) | 150 µA |
| Current-Supply(Max) | 250 µA |
| PSRR | 50dB ~ 40dB (1kHz ~ 10kHz) |
| ControlFeatures | Enable |
| ProtectionFeatures | Over Current, Over Temperature, Short Circuit |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
概要
Description
LP3985IM5-2.8 is a fixed-output low-dropout (LDO) voltage regulator from STMicroelectronics. It provides a stable 2.8 V rail from a higher input in a compact 5‑pin package (IM5 code). It’s suited for space‑constrained, battery‑powered designs needing a simple, low-noise supply.
Key points:
- Output: fixed 2.8 V
- Input range: up to about 5.5 V (per datasheet)
- Load current: typically around 100–150 mA (check datasheet)
- Dropout: low (typical) at modest loads
- Protections: current limit and thermal shutdown
- Enable/shutdown input to turn the regulator off
- External input/output capacitors required with values and ESR per the datasheet
Applications: microcontrollers, sensors, and other portable devices needing a stable 2.8 V rail. For exact electrical specs, pinout, and capacitor recommendations, consult the LP3985IM5‑2.8 datasheet.
Key points:
- Output: fixed 2.8 V
- Input range: up to about 5.5 V (per datasheet)
- Load current: typically around 100–150 mA (check datasheet)
- Dropout: low (typical) at modest loads
- Protections: current limit and thermal shutdown
- Enable/shutdown input to turn the regulator off
- External input/output capacitors required with values and ESR per the datasheet
Applications: microcontrollers, sensors, and other portable devices needing a stable 2.8 V rail. For exact electrical specs, pinout, and capacitor recommendations, consult the LP3985IM5‑2.8 datasheet.
Features
LP3985IM5-2.8 features (fixed 2.8 V LDO in IM5 package):
- Fixed output: 2.8 V
- Output current: up to about 150 mA
- Low dropout: low Vin headroom (typical dropout in a few hundred millivolts)
- Very low quiescent current
- Stable with ceramic output capacitors (low ESR)
- Input voltage range suitable for typical systems (approximately 2.7–5.5 V)
- Good line and load regulation; solid PSRR
- Protection features: current limit/short-circuit protection and thermal shutdown
- Small 5-pin SOT-23 (IM5) package for compact board space
- Wide operating temperature range (typical -40°C to 125°C) for industrial/automotive applications
Note: exact numbers (dropout, quiescent current, max current) vary by lot and conditions; consult the datasheet for precise specs.
- Fixed output: 2.8 V
- Output current: up to about 150 mA
- Low dropout: low Vin headroom (typical dropout in a few hundred millivolts)
- Very low quiescent current
- Stable with ceramic output capacitors (low ESR)
- Input voltage range suitable for typical systems (approximately 2.7–5.5 V)
- Good line and load regulation; solid PSRR
- Protection features: current limit/short-circuit protection and thermal shutdown
- Small 5-pin SOT-23 (IM5) package for compact board space
- Wide operating temperature range (typical -40°C to 125°C) for industrial/automotive applications
Note: exact numbers (dropout, quiescent current, max current) vary by lot and conditions; consult the datasheet for precise specs.
Package
The LP3985IM5-2.8 is supplied in a 5-pin SOT-23 package (TI package code "M5").
Pinout
The LP3985IM5-2.8 is supplied in a 5‑pin (SOT‑23‑5 / M5) package. Pin functions are:
- VIN – input supply
- VOUT – regulated 2.8 V output
- GND – ground
- EN (enable) – active‑high enable / shutdown control
- BYP/NR (bypass / reference) – noise‑reduction/reference bypass (or no‑connect on some fixed versions)
Function: a low‑dropout (LDO) linear regulator providing a fixed 2.8 V output with low quiescent current, internal current‑limit and thermal protection, intended for up to ~150 mA load (check the datasheet for exact dropout, Iq and full electrical characteristics).
- VIN – input supply
- VOUT – regulated 2.8 V output
- GND – ground
- EN (enable) – active‑high enable / shutdown control
- BYP/NR (bypass / reference) – noise‑reduction/reference bypass (or no‑connect on some fixed versions)
Function: a low‑dropout (LDO) linear regulator providing a fixed 2.8 V output with low quiescent current, internal current‑limit and thermal protection, intended for up to ~150 mA load (check the datasheet for exact dropout, Iq and full electrical characteristics).
Manufacturer
- Manufacturer: STMicroelectronics (ST).
- What kind of company: A global (multinational) semiconductor company that designs, manufactures, and sells a broad range of integrated circuits and electronic components, including analog ICs, MEMS/sensors, microcontrollers, and power devices. Headquarters: Geneva, Switzerland; publicly traded (NYSE: STM, Euronext: STM).
- What kind of company: A global (multinational) semiconductor company that designs, manufactures, and sells a broad range of integrated circuits and electronic components, including analog ICs, MEMS/sensors, microcontrollers, and power devices. Headquarters: Geneva, Switzerland; publicly traded (NYSE: STM, Euronext: STM).
Application
Common application areas for LP3985IM5-2.8 (2.8 V fixed LDO):
- 2.8 V supply for portable/battery-powered devices (handhelds, wearables, toys)
- Power rail for microcontrollers, DSPs, sensors, and peripheral ICs in consumer electronics
- Analog/RF front-ends and mixed-signal circuits needing a clean 2.8 V rail
- Display/LCD driver circuits and embedded modules
- Regulated 2.8 V supply derived from higher-input sources (3–5 V) in compact designs
(Uses where a stable 2.8 V rail is required.)
- 2.8 V supply for portable/battery-powered devices (handhelds, wearables, toys)
- Power rail for microcontrollers, DSPs, sensors, and peripheral ICs in consumer electronics
- Analog/RF front-ends and mixed-signal circuits needing a clean 2.8 V rail
- Display/LCD driver circuits and embedded modules
- Regulated 2.8 V supply derived from higher-input sources (3–5 V) in compact designs
(Uses where a stable 2.8 V rail is required.)
Equivalent
Possible equivalents (2.8V fixed LDO, ~150 mA+):
- ST LP2985-2.8
- TI TLV70028
- TI LM1117-2.8 / LD1117-2.8
- AMS1117-2.8
- Microchip MIC5205-2.8
- Microchip MCP1700-2.8 (check availability)
Note: pinout, dropout, and quiescent current vary between parts; verify datasheets and package compatibility before substituting.
- ST LP2985-2.8
- TI TLV70028
- TI LM1117-2.8 / LD1117-2.8
- AMS1117-2.8
- Microchip MIC5205-2.8
- Microchip MCP1700-2.8 (check availability)
Note: pinout, dropout, and quiescent current vary between parts; verify datasheets and package compatibility before substituting.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX29F400CBTI-70G
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V2033FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25V1635FM2I
Macronix
-
MX25U3232FZBI02
Macronix