画像は参照用のみです。
LM5176RHFR
IC POWER REGULATOR
- メーカー
- Mfr。パート #LM5176RHFR
- パッケージ 28-VFQFN Exposed Pad
- データシート
- 在庫中3531
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Texas Instruments |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
| OutputType | Transistor Driver |
| Function | Step-Up/Step-Down |
| OutputConfiguration | Positive |
| Topology | Buck-Boost |
| NumberofOutputs | 1 |
| OutputPhases | 1 |
| Voltage-Supply(Vcc/Vdd) | 4.2V ~ 55V |
| Frequency-Switching | 100kHz ~ 600kHz |
| SynchronousRectifier | Yes |
| ClockSync | Yes |
| ControlFeatures | Current Limit, Enable, Frequency Control, Power Good, Soft Start |
| OperatingTemperature | -40°C ~ 125°C (TJ) |
| MountingType | Surface Mount |
| Package/Case | 28-VFQFN Exposed Pad |
概要
Description
LM5176RHFR is TI’s high-performance DC-DC controller that drives external MOSFETs to regulate a wide-input DC supply (auto/industrial range) using buck, boost, or buck-boost operation with interleaved two-phase operation.
Key points:
- Wide input range and bidirectional regulation capability (output can be higher or lower than input).
- Two-phase interleaved control for better ripple and transient response.
- External N-channel MOSFET gate-drive capabilities, with current-mode control.
- Programmable switching frequency (hundreds of kHz), adjustable output via feedback, soft-start.
- Protections: overcurrent/short-circuit, undervoltage lockout, thermal protection.
- Suitable for automotive power rails, battery charging, and other DC-DC applications requiring wide input range and high efficiency.
- RHFR suffix mostly indicates RoHS/halogen-free packaging; check datasheet for exact package and spec details.
For exact electrical specs, pinout, and application circuitry, refer to the TI LM5176RHFR datasheet.
Key points:
- Wide input range and bidirectional regulation capability (output can be higher or lower than input).
- Two-phase interleaved control for better ripple and transient response.
- External N-channel MOSFET gate-drive capabilities, with current-mode control.
- Programmable switching frequency (hundreds of kHz), adjustable output via feedback, soft-start.
- Protections: overcurrent/short-circuit, undervoltage lockout, thermal protection.
- Suitable for automotive power rails, battery charging, and other DC-DC applications requiring wide input range and high efficiency.
- RHFR suffix mostly indicates RoHS/halogen-free packaging; check datasheet for exact package and spec details.
For exact electrical specs, pinout, and application circuitry, refer to the TI LM5176RHFR datasheet.
Features
Here are the typical features of LM5176RHFR (high-level, concise):
- Wide-input, automotive-friendly range (approximately 4.5 V to 60 V with transient protection for automotive use)
- Buck, boost, and buck-boost operation
- Integrated synchronous MOSFETs (high-side and low-side) in a single package
- Current-mode PWM control for fast transient response
- Programmable switching frequency with simple external compensation
- Adjustable output via feedback network; supports remote sensing
- Soft-start and enable pin for controlled start‑up
- Robust protection: cycle-by-cycle current limit, overcurrent/short-circuit protection, overvoltage, UVLO, thermal shutdown
- Fault reporting and latch/power-good signaling
- Suitable for automotive/industrial environments (AEC-Q100 qualified variant, RoHS)
Note: specific electricals (exact voltage ranges, timing, and pinout) can vary by package/revision; consult the datasheet for exact numbers.
- Wide-input, automotive-friendly range (approximately 4.5 V to 60 V with transient protection for automotive use)
- Buck, boost, and buck-boost operation
- Integrated synchronous MOSFETs (high-side and low-side) in a single package
- Current-mode PWM control for fast transient response
- Programmable switching frequency with simple external compensation
- Adjustable output via feedback network; supports remote sensing
- Soft-start and enable pin for controlled start‑up
- Robust protection: cycle-by-cycle current limit, overcurrent/short-circuit protection, overvoltage, UVLO, thermal shutdown
- Fault reporting and latch/power-good signaling
- Suitable for automotive/industrial environments (AEC-Q100 qualified variant, RoHS)
Note: specific electricals (exact voltage ranges, timing, and pinout) can vary by package/revision; consult the datasheet for exact numbers.
Package
HTSSOP-20 package (20-pin) with exposed pad.
Pinout
Pin count: 28 pins.
Function: LM5176RHFR is a high‑voltage buck/boost DC‑DC controller (synchronous topology; used for wide-input regulation, often in automotive applications).
Function: LM5176RHFR is a high‑voltage buck/boost DC‑DC controller (synchronous topology; used for wide-input regulation, often in automotive applications).
Manufacturer
LM5176RHFR is manufactured by Texas Instruments (TI). TI is a global American semiconductor company that designs and manufactures analog and mixed-signal integrated circuits, including power-management and embedded processing ICs.
Application
LM5176RHFR is a wide-input (up to ~60V) 4‑switch synchronous buck‑boost regulator. Typical applications:
- Automotive DC‑DC power supplies (ECUs, infotainment, body electronics)
- Industrial control and motor‑drive power modules
- Telecom/network power systems
- Battery‑powered and solar regulator circuits requiring buck/boost operation
- Any system needing high efficiency over a wide input range
- Automotive DC‑DC power supplies (ECUs, infotainment, body electronics)
- Industrial control and motor‑drive power modules
- Telecom/network power systems
- Battery‑powered and solar regulator circuits requiring buck/boost operation
- Any system needing high efficiency over a wide input range
Equivalent
Direct equivalents to LM5176RHFR are scarce; it is TI’s 60 V, 4‑phase buck/boost controller. Closest non‑TI options by function include Analog Devices LTC3895 (multiphase buck regulator) and LT8700/LT8705 families (buck‑boost controllers). Within TI, consider other LM5176 variants (e.g., LM5176A) or newer TI parts in the same family. For an exact cross, please share your required input range, output current, topology, packaging, and temperature grade; I can suggest precise substitutes.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25R8035FM1IL0
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M1I02
Macronix
-
MX25V16066M2I02
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25R1635FZUIH0
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZNI-10..
Macronix
-
MX29LV160DTTI-70G
Macronix
-
MX29F040CTI-70G
Macronix