画像は参照用のみです。
LAN91C113-NU
IC ETHERNET CTLR MAC PHY 128TQFP
- メーカー
- Mfr。パート #LAN91C113-NU
- パッケージ 128-TQFP
- データシート
- 在庫中5972
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Supplier | Microchip Technology |
| Package | Tray |
| ProductStatus | Active |
| Protocol | Ethernet |
| Function | Controller |
| Interface | Parallel |
| Standards | 10/100 Base-T/TX PHY |
| Voltage-Supply | 3.3V |
| Current-Supply | 100mA |
| OperatingTemperature | 0°C ~ 85°C |
| Package/Case | 128-TQFP |
概要
Description
LAN91C113-NU is an Ethernet controller from the LAN91Cxxx family (SMSC, now Microchip). It provides a 10/100 Mbps MAC and PHY in one chip to add network connectivity to embedded systems. The device is controlled by a host MCU/CPU via a parallel/PCI-type interface (depending on packaging) and includes TX/RX logic and packet buffers. It supports 10/100 auto-negotiation, half/full duplex modes, and standard IEEE 802.3 Ethernet frames. Typically a software driver is needed to initialize the hardware, configure speed/duplex, and manage packet transfers (often via DMA or I/O). It’s an older, well-documented part still seen in legacy designs, with newer LAN91Cxxx/LAN9xxx parts offering updated features. For exact pinout, interface mode, register map, and RAM requirements, consult the LAN91C113-NU datasheet and programmer’s guide.
Features
Key features of LAN91C113-NU:
- 10/100 Mbps Ethernet MAC/PHY with PCI host interface
- 32-bit PCI bus, supports 33/66 MHz
- Auto-negotiation; supports 10BASE-T and 100BASE-TX; full- and half-duplex
- MII/MDIO management interface for PHY control (external or integrated PHY)
- DMA-based data path with onboard TX/RX FIFOs and descriptor support
- Interrupts for RX/TX completion and error events
- IEEE 802.3/802.3u compliant; supports pause frames/flow control
- Software-friendly register interface with broad driver support
- Power-management features (D0 and low-power options)
(NU suffix details are device/package variants; features listed are core capabilities.)
- 10/100 Mbps Ethernet MAC/PHY with PCI host interface
- 32-bit PCI bus, supports 33/66 MHz
- Auto-negotiation; supports 10BASE-T and 100BASE-TX; full- and half-duplex
- MII/MDIO management interface for PHY control (external or integrated PHY)
- DMA-based data path with onboard TX/RX FIFOs and descriptor support
- Interrupts for RX/TX completion and error events
- IEEE 802.3/802.3u compliant; supports pause frames/flow control
- Software-friendly register interface with broad driver support
- Power-management features (D0 and low-power options)
(NU suffix details are device/package variants; features listed are core capabilities.)
Package
LAN91C113-NU comes in a 128-pin LQFP (lead-free, NU) package.
Pinout
- Pin count: 64 pins (64-pin package)
- Function: 10/100 Mbps Ethernet MAC/PHY controller (Ethernet NIC) for embedded systems.
- Function: 10/100 Mbps Ethernet MAC/PHY controller (Ethernet NIC) for embedded systems.
Manufacturer
Manufacturer: Standard Microsystems Corporation (SMSC).
Company type: A semiconductor company that designs networking ICs (e.g., Ethernet controllers, USB controllers). It has been acquired by Microchip Technology and operates as part of Microchip.
Company type: A semiconductor company that designs networking ICs (e.g., Ethernet controllers, USB controllers). It has been acquired by Microchip Technology and operates as part of Microchip.
Application
Typical applications for LAN91C113-NU include:
- Embedded systems needing 10/100 Mbps Ethernet (LAN add-on for microcontrollers/SoCs)
- Industrial automation and control networks
- Network gateways, routers, and edge devices
- Point-of-sale terminals, kiosks, and digital signage
- Small servers and network-attached storage
- IoT, data acquisition, and sensor networks
- Network-enabled consumer electronics and security devices
- Embedded systems needing 10/100 Mbps Ethernet (LAN add-on for microcontrollers/SoCs)
- Industrial automation and control networks
- Network gateways, routers, and edge devices
- Point-of-sale terminals, kiosks, and digital signage
- Small servers and network-attached storage
- IoT, data acquisition, and sensor networks
- Network-enabled consumer electronics and security devices
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25V1635FZNI
Macronix
-
MX25V1635FZNQ03
Macronix
-
MX25V5126FM1I
Macronix
-
MX25V16066M1I02
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25R6435FBDIL0
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX29GL512FHXFI-11..
Macronix
-
MX25U51279GXDR00
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25L2006EM1I-12G
Macronix
-
MX25L12833FM2I-10..
Macronix