KA431AZTA

画像は参照用のみです。

KA431AZTA

IC VREF SHUNT ADJ 1% TO92-3

  • メーカー
  • Mfr。パート #KA431AZTA
  • パッケージ
  • データシート
  • 在庫中823

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Part Status Obsolete
Base Product Number KA431
Reference Type Shunt
Output Type Adjustable
Voltage - Output (Min/Fixed) 2.495V
Current - Output 100 mA
Tolerance ±1%
Temperature Coefficient 50ppm/°C Typical
Operating Temperature -25°C ~ 85°C (TA)
Mounting Type Through Hole
Package TO-226-3, TO-92-3 (TO-226AA) Formed Leads
Supplier Device Package TO-92-3
Packaging Tape & Box (TB)
Voltage - Output (Max) 36 V
Current - Cathode 1 mA

概要

Description

KA431AZTA is a three‑terminal adjustable shunt regulator (programmable reference), similar to a TL431. It provides a precise reference around 2.495 V and uses an external resistor divider to set an output regulation point by sinking current from the cathode to the anode.
Key points:
- Pins: Cathode (K), Anode (A), Reference (REF).
- REF is held at ≈2.495 V; Vout is set by the resistor network from Vout to REF to ground: Vout ≈ Vref(1 + R1/R2) + Iref·R1.
- Used as a feedback reference in switcher and linear regulators, post-regulation, or overvoltage/clamp applications.
- The KA431AZTA code refers to a specific packaging/lot variant of the KA431 family; electrical specs (min/max currents, tolerance, tempco, impedance) vary by part and packaging—consult the datasheet for exact values.
In short, it’s a TL431-like precision reference used for adjustable regulation via external resistors.

Features

KA431AZTA is a TL431-compatible programmable precision shunt regulator (three-terminal: cathode, anode, reference).
Key features:
- Reference: 2.495 V
- Programmable output via external resistor divider (R1/R2) for adjustable regulation
- Can operate as an adjustable Zener or in error-amplifier feedback loops
- Regulation current: typically from about 1 mA (min) up to ~100 mA (max)
- Low dynamic impedance with good line and load regulation
- Wide working voltage: up to roughly 30–36 V
- Temperature stability with typical room-temperature accuracy around ±1% to ±2% (depends on grade)
- Available in compact packages (SOT-23-3, TO-92, etc.) for SMT and through-hole designs
Typical uses: voltage references, feedback references in DC-DC converters, linear regulators, and adjustable power supplies. For exact limits and tolerances, consult the specific KA431AZTA datasheet.

Package

TO-92 3-pin through-hole package (adjustable shunt regulator).

Pinout

3 pins. It is a programmable precision shunt regulator (TL431-compatible) with a 2.495 V internal reference. It acts as an adjustable Zener: by using an external resistor divider between output (cathode) and reference, it shunts current from cathode to anode to regulate the voltage at the set value. Pin functions: Reference, Anode, Cathode.

Manufacturer

KA431AZTA is not tied to a single original manufacturer. It’s a TL431-compatible adjustable shunt regulator, and the KA431 family is made by multiple semiconductor suppliers. The exact maker depends on the specific device you have (check the package marking, datasheet, or supplier).
In general, companies that produce these parts are semiconductor manufacturers that design and manufacture analog ICs (voltage references/shunt regulators) for electronic components and systems.

Application

KA431AZTA is a programmable precision shunt regulator (TL431-compatible). Common applications:
- Feedback reference in switch-mode and linear regulators
- Programmable zener/reference for voltage regulation
- Post-regulation and voltage monitoring circuits
- Overvoltage protection/crowbar schemes
- Battery charger regulation
- LED driver constant-current control
- General precision reference in instrumentation

Equivalent

KA431AZTA is a 2.495 V adjustable shunt regulator (TL431-compatible). Equivalents cross-referencing commonly used:
- TL431 (and TL431A/B/C)
- TLV431
- NCP431 (ON Semiconductor)
- LMV431 (various vendors)
- REF431 (Analog Devices)
- AZ431 / KA431 family cross (same device, different branding)
Note: verify pinout/package compatibility and bias current specs for your design.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似