ISO1042QDWRQ1

画像は参照用のみです。

ISO1042QDWRQ1

IC TRANSCEIVER FULL 1/1 16SOIC

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier Texas Instruments
Package Tape & Reel (TR),Cut Tape (CT)
Series Automotive, AEC-Q100
ProductStatus Active
Type Transceiver
Protocol CAN
NumberofDrivers/Receivers 1/1
Duplex Full
ReceiverHysteresis 120 mV
DataRate 5Mbps
Voltage-Supply 1.71V ~ 1.89V, 2.25V ~ 5.5V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 16-SOIC (0.295, 7.50mm Width)

概要

Description

ISO1042QDWRQ1 is an automotive-grade digital isolator from TI’s ISO1042 family. It provides four isolated digital data paths between two power domains (VDD1 and VDD2), offering galvanic isolation to protect low-voltage logic from high-voltage or noisy circuitry. The Q1 suffix indicates automotive qualification (AEC-Q100). Key benefits include independent supplies, isolation for safety and reliability, protection from transients, and relatively fast signal propagation with good noise immunity. Typical uses are isolating control signals (SPI/I2C/UART, general I/O) between a microcontroller and high-voltage sensors, actuators, or motor drivers in automotive and industrial applications. In short: a quad-channel, automotive-rated digital isolator that enables safe, reliable signal transfer across a barrier between two voltage domains.

Package

QFN (WQFN) package — 16 pins, 4×4 mm, with an exposed pad.

Pinout

Pin count: 16 pins.
Function: Isolated RS-485/RS-422 transceiver (one channel) with DI/RO data pins and DE/RE control. Provides galvanic isolation between the logic side and the bus side via dual supplies (VCC1/GND1 and VCC2/GND2) and A/B differential bus on the isolated side.

Manufacturer

- Manufacturer: Texas Instruments Incorporated (TI).
- Company type: American multinational semiconductor company that designs and manufactures a wide range of analog and digital integrated circuits and embedded processing products.

Application

ISO1042QDWRQ1 is a 2-channel isolated digital I/O transceiver (automotive grade). It provides galvanic isolation for logic signals, letting data cross high-voltage/noisy environments safely. Typical applications: automotive ECUs and body electronics, sensor/actuator interfaces, motor drives and power electronics, industrial automation (PLC and isolated sensors/controls), and renewable energy systems.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似