画像は参照用のみです。

IS25WP128F-JBLE-TR

Name: IS25WP128F-JBLE-TR
Rating: 4.7 (12 reviews)

IC FLASH 128MBIT SPI/QUAD 8SOIC

メーカー
Mfr。パート #IS25WP128F-JBLE-TR
パッケージ 8-SOIC (0.209, 5.30mm Width)
データシート
在庫中6806

+BOM RFQについて

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier	ISSI, Integrated Silicon Solution Inc
Package	Tape & Reel (TR)
ProductStatus	Active
MemoryType	Non-Volatile
MemoryFormat	FLASH
Technology	FLASH - NOR
MemorySize	128Mb (16M x 8)
MemoryInterface	SPI - Quad I/O, QPI, DTR
ClockFrequency	133 MHz
WriteCycleTime-WordPage	800µs
Voltage-Supply	1.65V ~ 1.95V
OperatingTemperature	-40°C ~ 105°C (TA)
MountingType	Surface Mount
Package/Case	8-SOIC (0.209, 5.30mm Width)

概要

Description

IS25WP128F-JBLE-TR is a 128-Mbit Serial NOR flash memory from ISSI (IS25WP family). It uses a low-pin SPI interface with modes for Single, Dual, and Quad I/O (DIO/QIO) to boost throughput. Key points:
- Capacity: 128 Mbit (16 MB), organized in pages (commonly 256 bytes) with sector/block erases (4K/32K/64K).
- Interface: SPI-compatible with higher-speed Quad I/O options.
- Voltage: Typically 1.7–3.6 V, suitable for embedded systems across various temperature grades (industrial variants available).
- Packaging: -TR indicates Tape-and-Reel packaging for automated assembly; JBLE denotes a specific packaging/lead-free option.
- Applications: Firmware/code storage, boot memory, data logging, and secure storage in microcontroller-based designs.
For exact timings, voltage bounds, endurance, sector map, and device IDs, consult the ISSI IS25WP128F datasheet and packaging guide.

Features

Key features of IS25WP128F-JBLE-TR (128‑Mbit Serial Flash, Tape & Reel):
- Density: 128 Mbit (16 MB) serial NOR flash
- Voltage: 2.7–3.6 V single-supply operation
- Interface: SPI-compatible serial interface with standard SPI and Dual/Quad I/O read modes for higher throughput
- Speed: Fast read options up to high MHz range (typical up to 104 MHz in SPI/dual-quad modes)
- Program/Erase: 256-byte page programming; 4 KB, 8 KB, and 64 KB erase blocks; supports chip erase
- Power modes: Deep power-down mode for low standby power
- Protection: Hardware WP# pin and software/Block protection options
- Reliability features: Program/erase suspend and resume
- Data retention: Long data retention (typical multi-year)
- Endurance: Typical P/E cycles per sector (specified in datasheet)
- Temperature: Industrial range from -40°C to 85°C
- Packaging: 8-pin package in Tape & Reel (JBLE-TR)
Note: For exact timings, voltages, and protection options, refer to the latest datasheet.

Package

An 8‑pin SOIC (SO-8) package in Tape & Reel (TR), RoHS lead‑free variant.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC-8)
- Function: 128-Mbit serial SPI flash memory with CS, CLK, DI (MOSI), DO (MISO), plus WP# and HOLD# control lines (VCC and GND). Supports standard SPI/serial access with write protection and hold features.

Manufacturer

- Manufacturer: Integrated Silicon Solution, Inc. (ISSI).
- What kind of company: A semiconductor company that designs and markets memory ICs (memory products like NOR flash and SRAM/DRAM); ISSI is a fabless memory company.

Application

IS25WP128F-JBLE-TR is a 128-Mbit Serial Quad I/O NOR Flash. Typical applications:
- Firmware storage and boot memory for microcontrollers/SoCs
- Code shadowing and executable storage in embedded systems
- Data logging and asset/config storage in IoT, consumer and industrial devices
- OTA firmware updates and backup storage
- Configuration data, look-up tables and assets
- Fast boot/program fetch enabled by Quad SPI

Equivalent

Equivalent 128‑Mbit SPI NOR Flash parts from other vendors:
- Winbond W25Q128FV (3V SPI)
- Macronix MX25L12845G/MX25L12845F
- GigaDevice GD25Q128CSIG (GD25Q128C)
- Micron N25Q128A (N25Q128A series)
- Spansion/Cypress S25FL128S
- Microchip/Atmel AT25SF128A
Note: check voltage, timing, and package to ensure true drop‑in compatibility.