INA199B3DCKR

画像は参照用のみです。

INA199B3DCKR

IC OPAMP CURR SENSE 14KHZ SC70-6

  • メーカー
  • Mfr。パート #INA199B3DCKR
  • パッケージ SOT-SC70 (DCK)-6
  • データシート
  • 在庫中8820

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Package Tape & Reel (TR),Cut Tape (CT)
Series Zero-Drift
ProductStatus Active
Function Current Sense
SensingMethod High/Low-Side
Accuracy ±1.5%
Voltage-Input -0.1V ~ 26V
OperatingTemperature -40°C ~ 125°C
MountingType Surface Mount
Package/Case 6-TSSOP, SC-88, SOT-363

概要

Description

INA199B3DCKR is Texas Instruments’ high-side current-sense monitor in an 8-pin VSSOP (DCK) package with Tape & Reel. It measures the voltage across a shunt resistor in the load’s high side and outputs an analog voltage proportional to the load current, serving as a front end for current sensing.
Key points:
- High-side sensing: common-mode up to about 40 V; VCC typically 2.7–5.5 V.
- Output proportional to shunt voltage with a fixed gain; REF pin allows zero-offset adjustment.
- No external ADC required for basic sensing; easy to feed to an ADC or comparator.
- Designed for automotive/industrial use with good precision and fast response.
- Package: 8-pin VSSOP (DCK), RoHS, Tape & Reel.
Typical usage: connect SH+ and SH− across a sense resistor, supply VCC to a logic rail, ground to GND, read VOUT (and adjust with REF if needed). For exact specs and ordering, consult the TI INA199 datasheet.

Features

Concise features of INA199B3DCKR:
- High-side current-sense monitor with current-output architecture
- Wide input/common-mode range: up to about 0–26 V (sensing across a shunt on the high side)
- Differential sense voltage across shunt: typically ±100 mV range
- Supply voltage (Vcc): 2.7 V to 5.5 V (single-supply operation)
- Output: Iout current output; external resistor converts to voltage; Vref pin available for offset/zero set
- Fast response with low offset and good accuracy over temperature
- Wide operating temperature: -40°C to +125°C
- 8-pin package (DCK/RoHS compliant, VSSOP family)
- Suitable for rugged automotive/industrial sensing with simple Iout-to-V conversion
Note: For exact electrical specs (gain, Iout range, input offset, protection features), please consult the TI datasheet for INA199B3DCKR.

Package

The INA199B3DCKR is in an 8-pin DCK package, i.e., VSSOP-8 (Very Small Outline Package) with tape-and-reel.

Pinout

- Pin count: 8 pins (8-pin package, DCKR).
- Function: High-side current-sense amplifier with a current-output (Iout). It senses the voltage across an external shunt resistor (IN+ to IN−) and outputs a current proportional to that differential voltage, with REF for offset. Used for bidirectional current monitoring in the power path.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits; headquartered in Dallas, Texas, and one of the world's largest semiconductor producers.

Application

Typical application areas for INA199B3DCKR:
- High-side current sensing for power supplies and DC-DC converters
- Battery-management and protection in portable and automotive systems
- Overcurrent protection and fault detection in motor drivers and power stages
- Load-current monitoring for regulation and efficiency
- Power-management ICs in automotive, telecom, servers, and consumer electronics

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似