ICM-20608D

画像は参照用のみです。

ICM-20608D

MOTION TRACKING DEVICE

  • メーカー
  • Mfr。パート #ICM-20608D
  • パッケージ
  • データシート
  • 在庫中11078

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Part Status Obsolete
Packaging Bulk

概要

Description

ICM-20608D is a 6‑axis MEMS IMU from InvenSense (now part of TDK). It combines a 3‑axis accelerometer and a 3‑axis gyroscope with an on‑chip digital motion processor (DMP) for on‑board sensor fusion.
Key points:
- Interfaces: I2C or SPI
- Output: high data rates (up to ~1 kHz) with FIFO buffering
- Full-scale ranges: accelerometer typically ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps
- Power modes: configurable for low power
- Extras: temperature sensor, self‑test, interrupt outputs
- Applications: drones, robotics, wearables, motion sensing in devices
Note: exact pinout, register map, and DMP options vary by revision; consult the official datasheet and reference software for implementation details.

Features

Key features of the ICM-20608D:
- 6‑axis IMU: 3‑axis accelerometer + 3‑axis gyroscope.
- 16‑bit sensor data with programmable full scales: accelerometer ±2/4/8/16 g; gyroscope ±125/250/500/1000/2000 dps.
- High ODR with configurable digital filtering (up to 1 kHz data rate; configurable LPF).
- On‑chip temperature sensor for bias/temperature compensation.
- FIFO buffer and multiple interrupt options (data ready, FIFO watermark, etc.) for efficient data handling.
- Flexible serial interfaces: I2C and SPI (standard voltage compatibility).
- Low-power operation with sleep and accelerometer‑only modes.
- Self‑test and factory calibration for drift reduction.
- Small form factor (LGA package) and wide operating conditions: −40 °C to 85 °C.

Package

ICM-20608D is packaged in a 3×3 mm QFN (24-pin) package.

Pinout

ICM-20608D pin count: 28-pin LGA package.
Main pin functions (grouped):
- Power/grounds: AVDD, DVDD, VIO/VLOGIC (IO), multiple GND pins.
- Clock: XIN/XOUT (or EXT_CLK) for oscillator.
- Interface (digital I/O): I2C: SCL, SDA; SPI: SCK, MOSI, MISO, CS (NCS).
- Interrupt/status: INT, FSYNC, DRDY (data-ready).
- Address/select: AD0/AD1 (optional configurable I2C address).
- Other/pad pins: NC or reserved as per datasheet.
Note: exact pin mapping and available signals can vary by package variant; please consult the official datasheet for the precise pinout.

Manufacturer

- Manufacturer: InvenSense (a MEMS motion-sensor company; now a subsidiary of TDK Corporation).
- What kind of company: A global MEMS sensors designer/manufacturer specializing in inertial measurement units (accelerometers and gyroscopes) for smartphones, wearables, drones, automotive, and other electronics.

Application

ICM-20608D is a 6‑axis MEMS IMU (3‑axis accel + 3‑axis gyro). Key applications include:
- Mobile devices and wearables (motion sensing, gesture/UI)
- Gaming controllers and peripherals
- Drones and robotics (attitude estimation, stabilization)
- IoT and smart devices (gesture recognition, activity monitoring)
- Industrial monitoring (vibration, tilt, motion sensing)

Equivalent

Equivalent 6-axis IMUs (accelerometer + gyroscope, I2C/SPI):
- InvenSense ICM-20602
- MPU-6050 / MPU-6500 (InvenSense)
- Bosch BMI160
- STMicroelectronics LSM6DS3
Note: not pin-compatible; check interface, full-scale ranges, and power/performance specs to ensure suitability.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似