画像は参照用のみです。
GD25Q16CSIGR
IC FLASH 16MBIT SPI/QUAD 8SOP
- メーカー
- Mfr。パート #GD25Q16CSIGR
- パッケージ 8-SOIC (0.209, 5.30mm Width)
- データシート
- 在庫中6083
100% オリジナル &新しい
出荷の準備ができている24時間
365日の保証
RFQおよびもっと割引を得る
仕様
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Not For New Designs |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 16Mb (2M x 8) |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 120 MHz |
| WriteCycleTime-WordPage | 50µs, 2.4ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
概要
Description
The GD25Q16CSIGR is a 16 Megabit (2 Megabyte) Serial NOR Flash memory chip manufactured by GigaDevice. It employs a Quad SPI (Serial Peripheral Interface) architecture, allowing for high-speed data transfer rates, typically reaching up to 104 MHz. This chip is designed for applications that require non-volatile storage, such as firmware, configuration data, and system boot code in embedded systems.
Key features include:
- Memory Density: 16Mb (2MB)
- Interface: Quad SPI, supporting single, dual, and quad I/O modes.
- Voltage Range: Operates typically at 3.0V to 3.6V, making it suitable for various electronic applications.
- Endurance: Typically rated for around 100,000 program/erase cycles.
- Data Retention: Typically up to 20 years.
The GD25Q16CSIGR is widely used in applications such as consumer electronics, automotive, industrial devices, and IoT products due to its reliability and performance.
Key features include:
- Memory Density: 16Mb (2MB)
- Interface: Quad SPI, supporting single, dual, and quad I/O modes.
- Voltage Range: Operates typically at 3.0V to 3.6V, making it suitable for various electronic applications.
- Endurance: Typically rated for around 100,000 program/erase cycles.
- Data Retention: Typically up to 20 years.
The GD25Q16CSIGR is widely used in applications such as consumer electronics, automotive, industrial devices, and IoT products due to its reliability and performance.
Features
The GD25Q16CSIGR is a 16Mb (2MB) Serial NOR Flash memory from GigaDevice, featuring a Quad-SPI interface for high-speed data transfer. Key features include:
1. Storage Capacity: 16Mb (2MB).
2. Interface: Supports SPI and Quad-SPI modes, enabling faster read speeds.
3. Read Speed: Up to 104MHz in Quad-SPI mode.
4. Voltage Range: Operates between 2.7V to 3.6V, with low power consumption.
5. Program/Erase Cycles: Supports a minimum of 100,000 program/erase cycles.
6. Data Retention: Retains data for more than 20 years at 25°C.
7. Package Options: Available in various packages including SOIC, WSON, and UFDFPN.
8. Security Features: Includes a 64-bit unique ID and supports hardware write protection.
These attributes make the GD25Q16CSIGR suitable for a variety of applications, including embedded systems, consumer electronics, and automotive devices.
1. Storage Capacity: 16Mb (2MB).
2. Interface: Supports SPI and Quad-SPI modes, enabling faster read speeds.
3. Read Speed: Up to 104MHz in Quad-SPI mode.
4. Voltage Range: Operates between 2.7V to 3.6V, with low power consumption.
5. Program/Erase Cycles: Supports a minimum of 100,000 program/erase cycles.
6. Data Retention: Retains data for more than 20 years at 25°C.
7. Package Options: Available in various packages including SOIC, WSON, and UFDFPN.
8. Security Features: Includes a 64-bit unique ID and supports hardware write protection.
These attributes make the GD25Q16CSIGR suitable for a variety of applications, including embedded systems, consumer electronics, and automotive devices.
Package
The GD25Q16CSIGR is packaged in a SOIC-8 (Small Outline Integrated Circuit, 8-pin) configuration. This package type is commonly used for surface-mount technology (SMT) applications, allowing for efficient space utilization on printed circuit boards.
Pinout
The GD25Q16CSIGR is a 16 Mb (2 MB) serial NOR Flash memory chip with a total of 8 pins. Here’s a brief overview of the pin functions:
1. VCC: Power supply pin (typically 2.7V to 3.6V).
2. GND: Ground pin.
3. SO (Serial Output): Data output pin for serial communication.
4. SI (Serial Input): Data input pin for serial communication.
5. SCK (Serial Clock): Clock signal pin used to synchronize data transmission.
6. CS (Chip Select): Active low pin used to select the device when communicating.
7. WP (Write Protect): Pin used to protect the memory from unwanted write operations.
8. HOLD: Pin used to pause the serial communication without resetting the device.
This chip supports various modes of operation, including Quad-SPI, and is commonly used in applications requiring non-volatile memory storage.
1. VCC: Power supply pin (typically 2.7V to 3.6V).
2. GND: Ground pin.
3. SO (Serial Output): Data output pin for serial communication.
4. SI (Serial Input): Data input pin for serial communication.
5. SCK (Serial Clock): Clock signal pin used to synchronize data transmission.
6. CS (Chip Select): Active low pin used to select the device when communicating.
7. WP (Write Protect): Pin used to protect the memory from unwanted write operations.
8. HOLD: Pin used to pause the serial communication without resetting the device.
This chip supports various modes of operation, including Quad-SPI, and is commonly used in applications requiring non-volatile memory storage.
Manufacturer
The GD25Q16CSIGR is manufactured by GigaDevice Semiconductor Inc., a company based in China. GigaDevice specializes in the design and production of memory and microcontroller products, particularly flash memory and NOR flash devices. Established in 2005, GigaDevice has become a significant player in the semiconductor industry, focusing on providing high-performance and cost-effective solutions for various applications, including consumer electronics, automotive, industrial, and communications. The GD25Q16CSIGR, specifically, is a 16 megabit (2 MB) serial NOR flash memory device commonly used in applications requiring non-volatile storage.
Application
The GD25Q16CSIGR is a serial NOR Flash memory chip commonly used in various applications, including embedded systems, automotive electronics, consumer electronics, and IoT devices. It serves as a storage solution for firmware, boot code, and data logging. Its fast read speeds and low power consumption make it suitable for applications requiring quick access to stored information, such as in smartphones, tablets, and industrial automation systems.
Equivalent
The GD25Q16CSIGR chip is a 16Mb (2MB) SPI NOR Flash memory. Equivalent products include the Winbond W25Q16JV, Micron MT25QL128, and the Adesto AT25DF161. These alternatives also offer similar specifications like storage capacity, interface, and performance characteristics.
出荷
出荷方法私たち
DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。
出荷料参照(DHL/FedEx):
DHL の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は2〜5営業日です。
フェデックス: 配送費は25ドル〜40ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
UPS の: 配送費は25ドル〜45ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
TNT社: 配送費は25ドル〜65ドル(0.5kg)の範囲で、推定配送時間は3〜7営業日。
EMS: 配送料金は30〜50ドル(0.5kg)の範囲で、推定配送時間は7〜15営業日です。
登録航空郵便: 配送費は2〜4ドル(0.1kg)で、推定配送時間は5〜20営業日です。
支払い
Payment Methods
支払い期間は100%前払いです。
現在、下記の支払い方法のみを受け入れています。:
1. ペイパル
2. クレジット・デビットカード
3. ワイヤー 転送
類似
-
MX25L3233FM1I-08Q
Macronix
-
MX25V1635FZNI
Macronix
-
MX25V4035FZUI
Macronix
-
MX25V16066M2I02
Macronix
-
MX30LF2G28AD-TI
Macronix
-
MX25L8035EM2I-10G
Macronix
-
MX25L25673GMI-08G
Macronix
-
MX25L25673GMI-10G
Macronix
-
MX25U25643GZNI00
Macronix
-
MX25V1635FM2I
Macronix
-
MX25L6433FM2I-08G
Macronix
-
MX25L12833FZ2I-10..
Macronix