GD25D10CKIGR

画像は参照用のみです。

GD25D10CKIGR

IC FLASH 1MBIT SPI/DUAL 8USON

  • メーカー
  • Mfr。パート #GD25D10CKIGR
  • パッケージ 8-XFDFN Exposed Pad
  • データシート
  • 在庫中7916

100% オリジナル &新しい

出荷の準備ができている24時間

365日の保証

RFQおよびもっと割引を得る

仕様

Supplier GigaDevice Semiconductor (HK) Limited
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
MemoryType Non-Volatile
MemoryFormat FLASH
Technology FLASH - NOR
MemorySize 1Mb (128K x 8)
MemoryInterface SPI - Dual I/O
ClockFrequency 100 MHz
WriteCycleTime-WordPage 50µs, 4ms
Voltage-Supply 2.7V ~ 3.6V
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 8-XFDFN Exposed Pad

概要

Description

GD25D10CKIGR is a 1‑Mbit serial (SPI) flash memory from GigaDevice. It’s used to store code or data in embedded systems and is accessed via SPI with standard flash commands.
Key specs (typical):
- Density: 1 Mbit (128 KB)
- Interface: Serial SPI (JEDEC standard)
- Voltage: 2.7–3.6 V
- Organization: 256‑byte page, 4 KB sectors
- Operations: Read, Fast Read, Page Program, Sector Erase, Chip Erase; Write Enable/Protect; Power-down
- Package: 8‑pin (SOP‑8/SOIC); suffix -IGR indicates RoHS-compliant, industrial-temp grade, in an 8‑pin package
Typical uses: boot code storage, configuration data, firmware updates, and other small onboard flash needs. For exact timing, commands, and pinout, refer to the official GD25D10C/KIGR datasheet.

Features

Here are the main features of GD25D10CKIGR (1 Mbit serial SPI Flash):
- Capacity: 1 Mbit (128 KB) of non-volatile flash
- Interface: Serial SPI (standard 3- or 4-wire SPI with HOLD/WP)
- Supply voltage: 2.7V–3.6V
- Memory organization: 256-byte page size
- Erase: 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Program: Page program up to 256 bytes
- Read: Standard and fast read (up to high-speed frequency with dummy cycles)
- Addressing: 3-byte addressing
- Protection: Status register with Write Enable Latch and block-protection bits; WP# protection
- Power modes: Deep Power-Down mode and active standby
- Endurance: Typical 100k P/E cycles
- Temperature: Industrial range (-40°C to +85°C)
- Package: 8-pin package (SOP) available in GD25D10CKIGR
Note: For exact timing, command set, and voltage/temperature specs, refer to the datasheet.

Package

8‑pin SOP (SOIC‑8) package.

Pinout

- Pin count: 8 pins (SOP-8 package, GD25D10CKIGR)
- Function: 1 Mbit (128 KB) serial SPI flash memory. Non-volatile storage for firmware/data with SPI interface (SCK, SI, SO, CS) plus WP# and HOLD# controls, supporting typical read/write/erase and status register operations.

Manufacturer

- Manufacturer: GigaDevice Semiconductor Inc. (GigaDevice)
- What it is: A fabless semiconductor company that designs and sells non-volatile memory products, especially serial NOR flash and related memory devices.

Application

GD25D10CKIGR is a 1-Mbit SPI serial flash memory. Applications include:
- Firmware storage and boot code for microcontrollers
- Code shadowing and look-up tables
- Configuration, calibration, and parameter storage in embedded systems
- Firmware upgrade memory
- Small data logging in sensors, meters, and IoT devices
- Bootloaders and secure memory in consumer electronics
- Automotive/industrial control modules needing non-volatile settings storage

Equivalent

Equivalent 1-Mbit SPI NOR flash parts (pin-compatible, 3V):
- Winbond W25Q10BV / W25Q10CV
- Macronix MX25L010
- ISSI F25L01A
Note: verify exact voltage/ timing specs and package, but these are common equivalents to GD25D10C/CKIGR.

出荷

出荷方法私たち

DHL、FedEx、TNT、UPS、またはあなたの選択の他の運送業者を通じてグローバルな出荷サービスを提供します。


出荷料参照（DHL/FedEx）:

DHL の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は2〜5営業日です。

フェデックス: 配送費は25ドル〜40ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

UPS の: 配送費は25ドル〜45ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

TNT社: 配送費は25ドル〜65ドル（0.5kg）の範囲で、推定配送時間は3〜7営業日。

EMS: 配送料金は30〜50ドル（0.5kg）の範囲で、推定配送時間は7〜15営業日です。

登録航空郵便: 配送費は2〜4ドル（0.1kg）で、推定配送時間は5〜20営業日です。

支払い

Payment Methods

支払い期間は100％前払いです。

現在、下記の支払い方法のみを受け入れています。:

1. ペイパル

2. クレジット・デビットカード

3. ワイヤー 転送

類似